3D printing

Can someone design this, as need a new one for a job as my one is broken

There not 3d modals on the web right now

Can someone design a replacement canopy for the meteor75 pro 2 o4 wide

My one broke and I need a new before 48 hours but I do have a 3d printer

Mediocre Nerd happened to post a video this morning with real world testing that covered several current discussions here from printing frames to walksnail. thought it might be useful to some. it was pretty encouraging seeing his frame testing and even though its still 2x the weight of carbon, we are absolutely getting closer to viable designs/materials for certain sizes of printed frames!!

https://www.youtube.com/watch?v=PI8suYz2Tf0

Hello there.

After some time exploring 3D printing for 5" dron, I got sidequested to Li-Ion territory and now I have fully 3D printed 3" "freestyle" 3S Li-Ion drone. It's prototype to test viability but first flight was promissing. It has custom designed battery holder for easy load/unload without risk of shorting up contacts, with XT30 as "turn on switch". It's not under 250g tho (around 300 with batteries), but agile and fun. Will do more testing and refinement and if anyone will be interested, I can later share some STLs.

https://youtube.com/shorts/aRDt3xgBAiE

Well hello again! The electronics are ordered, but they're my christmas present. I will probably post a few weeks after christmas and share my test results. In the moment I'm working on the frame v1.1, because v1.0 had minor errors in the frame design.

Hopefully I can convince @AurilFPV that 3d printed frames are good :)

I made another (3d printed) drone frame!

It's a 3.5 quad, printed out of cf-filament and panda themed :). It should be pretty good (no extreme vibrations), but I sadly can't test it. I don't have the electronics and won't get them soon :(

Have fun printing/flying/testing/modifying!

https://makerworld.com/de/models/3226972-bando-panda-v1#profileId-3654538

I'm trying to make a skid with motor protection that fits the QAV-S 2 5", this is what i have so far:

Made a simple model for holding set of hex drivers so i don't keep stabbing myself when i reach into my drone bag, haha.

After some time I'm again on 3D printing frame yourney. If anyone is interested how it went so far, check my video https://youtu.be/Md2SPlbG5xo

Currently printing another version of handcrafter frame inspited by organic shape from topology generated one.

I can share some STLs if anyone interested.

Hello fpv friends! Is there anybody in America near the east coast that 3D print some parts for me! Willing to pay!

Does anyone have any resources for someone who can do TPU printing for me, or can advise me on how to improve my model, I suck at 3D modelling and always struggle printing TPU. Here is the model:

https://cad.onshape.com/documents/ea5ff95622f102ba0f13a3e3/w/fd3af2f0d31db8f752acd6ef/e/9dd4525a4627556e9e052112?renderMode=0&uiState=6a30872ca12e208b131bfa7d

My part broke on first flight and i didn't even land hard.

Does anyone have 3d print files for a dual antenna/elrs/gps holder for the qav-s frame?

Check this out if you have a tinyape! https://makerworld.com/sv/models/2893411-battery-holder-for-darwin-fpv-tinyape-2s#profileId-3233310

Would anyone 3D-print a whoop case for me.

I am in Estonia, I would cover the expenses.

Hello again! This time a 3 inch frame! I linked all the Parts, that I would put on this frame. If someone prints it please give me feedback!

https://www.thingiverse.com/thing:7333549

Have fun printing!

Hello! I made a 5 inch frame. If someone prints it I'd like your feedback. I linked all the parts, that I would put on this drone.

https://www.thingiverse.com/thing:7333548

Have fun printing, I hope this frame is any good!

Can someone that has the Eachine ev 100 please tell me the height of the strap, I am making a 3D printable mount for the DVR.

14th time is the charm.... This is so i can mount my GPS module on the back of my Archetype frame.

Designed a new rear mount for the archetype frame... with gps mount. This is a test print in PLA

Hey! Tried to find a good tail for Manta 5 DC with non-SMA o3 antenna, but didn't succeed. So I've made a custom

https://www.printables.com/model/1578389-manta-5-se-dc-single-and-double-o304-antennas