A

AleksFPV

Last seen: Nov 21, 17:09
Followers
2
Following
0
Upvotes
0
Posts
4
A teen that started flying a few years ago.

Activity feed

November 20, 2026 at 2:34 AM

Commented on post
Saw them looks cool. I support their mission and think they will make a change in fpv for the better. Hopefuly the start of an open source era!

November 20, 2026 at 2:27 AM

Commented on post
@AleksFPV I use lava 550mah batterys though so the heavier wheght likely puts more strain on the canopy in crashes.

November 20, 2026 at 2:26 AM

Commented on post
@AurilFPV I find the air ii canopies to be weak but I just fix them with e6000 and they hold up everything full speed crashes into wals and more but I find they break in the four corners around the camera. Mine ime currently using is glued on every single corner of the cam.

November 20, 2026 at 2:23 AM

Commented on post
@LachieFPV Same I also love the experience of building even though higher costs. Have built all my quads and love that I can make it into whatever I want getting to chose every single part. I also just love messing with electronics and soldering. My favorite past times.

November 20, 2026 at 2:20 AM

Commented on post
@LachieFPV Yep most expensive system more than DJI and Walksnail

November 20, 2026 at 2:19 AM

Commented on post
My grain of salt is that analog is underrated. Buy a air 75 or 65 and fly for yourself. Flying for yourself and not someone will make you enjoy the hobby much more so just fly to have fun. Btw when your flying analog you wont realy notice that its "bad quality video" unless your flying realy far. Im assuming your just starting so I recomend air 65 freestyle for indoor flying and air 75 for outdoor. Both can be used for either but chose trhe drone for where you will fly most. If you want to build whoop from scratch with analog or a digital system I am willing to help you select what parts are right for you. Just quad under 300 you can do but with goggles and radio no chanse.

November 15, 2026 at 2:48 PM

Commented on post
@AleksFPV Take this with a grain of salt tho as charging at 2c is more dangerous and always watch your batterys when charging and charge in a safe place!

November 15, 2026 at 2:46 PM

Commented on post
@AurilFPV I always charge at 2c for a year and have only had to retire 1 whoop battery because of a crash causing it to hit a rock making it puffy, luckily no explosions.

November 15, 2026 at 1:36 AM

Commented on post
dont live anywhere near

November 13, 2026 at 10:06 PM

Commented on post
Get a vifly whoopstor its like 20$-40$ and alows you to charge to storage voltage extending battery life.

November 9, 2026 at 4:52 PM

Commented on post
I’m doing racegow this year and it’s great fun even though I’ve never raced drones before and am by far not the best. Still great fun and has already improved my flying.

November 2, 2026 at 3:04 PM

Commented on post
Bend and send

October 27, 2026 at 8:19 PM

Commented on post
Just a thing to prevent whoop setup accidents as betaflights default is set up for most 5" drone motors.

October 27, 2026 at 8:18 PM

Commented on post
Also when doing betaflight setup In make sure in the motor tabs it has the corect amount of motor magnets or the mottor will stutter may fly but can easily burn the motor and esc.

October 27, 2026 at 8:17 PM

Commented on post
In beta flight make sure in the motor tabs it has the corect amount of motor magnets i have had this stuttering problem before and this fixed it.

October 25, 2026 at 11:33 PM

Commented on post
If this is the stack it is not compatible with osd you could just plug vtx and cam to power then connect their comunicating wires to get video but no osd.

October 25, 2026 at 11:30 PM

Commented on post
@SiO2 This is a differnt stack as he has the hd version witch im assuming isnt on the builder. And this wont be cross compatible as no analog osd chip will be present on his.

October 25, 2026 at 11:28 PM

Commented on post
This is and HD fc so you will not have osd and you just directly solder the cam to the vtx and just solder gnd and pwr to the fc on the vtx because its and hd vtx it will not have an analog osd chip so cant do to much with this combo dont recomend this set up too much as you wont have any telem in the goggles such as bat voltage quite important stats you need to fly so I would go out and buy an analog fc. Anyone corect me if im wrong btw.

October 25, 2026 at 11:24 PM

Commented on post
Time for the 20" x8 and the 20000$ red comodo am I right.

October 25, 2026 at 11:23 PM

Commented on post
I think a crux frame is basicly what your looking for.

Let's take flight together and elevate the world of FPV drones to new heights.

© 2026 DIYFPV. All rights reserved.