has anyone used chirp mode on the new Betaflight 2026.06? I used it once just to test it, now every time i fly it says CHIRP EXC FINISHED warning in my goggles, even after removing and restoring power.

Really well put together video from the famous 'know it all' 😀Bardwell.

Congratulations Stu and team. 👍

https://www.youtube.com/watch?v=pD_knjma5Oc&lc=UgwMNMH4FzT9PZicdKp4AaABAg.AZTWGUOk_rzAZUQNC2x9eg

170 folks online 🎉 this must be a new record ♥️

I have a drone that flew on a little rain one time and I am now noticing rust on the motors will that kill them eventually and is there anyway to fix it?

The builder is a game changer. If timepermits, gonna start building a diatone mamba f722 this evening.

Hello community. This is great!!! I have been looking for a community as I cannot find too many fpv enthusiasts in WV. First year fpv trainee here getting my feetwet and learning through build/fly/curse/build/etc. Looking forward to the community discussions

Yupp, a cargo container at the speed of mach 10 will do that.. RIP... back to the work bench 🛠️🛠️😉

Does anyone know if Skyzone fixed the latency issues with 040pro?

will the builder ever get released if it never reaches the gaol?

I found a nice documentation from arte (the video is german) about guerilla whooping and fpv:

https://www.youtube.com/watch?v=u73KgE0AjtQ

They start to talk about a big problem at eleven and a half minutes. A lot of people associate our hobby with bad things and bad people. A lot of people I talked to about FPV immediately thought of drone warfare and people flying illegally.

I think it's just sad, because fpv is a fun hobby with great people, but somehow most people think we're the bad guys.

Here in Germany, many people think like that; how is it in your area?

I replaced my 5.1" props which were i think rubbing the battery strap every so often causing vibration. It fixed the issue

https://youtu.be/cyYVmT_W3b0?si=3qwcOtEA8e-RUKA5

There is a weird glitch after the rolls but I think it is just a video glitch I didnt see that while flying

MADLABS: LETS FIX DEVO'S DRONE come hang out and fix some drones with madman himself

Hey ppls, so i was thinking if i should transfer my custom fpv kwad to this ACK75 frame because my old frame is made for holding 2s and the props kept on hitting the prop guards so i had to trim it, plus i can take of the guard and it will become an open-pusher 75mm? My build was originally a Matrix V2 Aio fc, 4 Happymodel se0802 19000kv motors, C03 camera, GF 1614 props with Happymodel Mobula 7 v3 frame but one of the motor cables came loose from the motor( if you know happymodel motors, is not like betafpv ones, it doesn't have a board and it is just direct solder from copper wire to motor wire) so i soldered on the old motor wires from the happymodel ones on to my Betafpv 0802se 23000kv motor and some how, it acted like the old 19000kv motor? It flies normally too! Before that, in the motors tab i set the throttle limit to 85%. Should i do the transfer to this ACK75 frame? Btw is pusher better for freestyle? I dont see much ppl use pusher for freestyle, so is it bad? Is mostly for cinematic right?

Has anyone gone hands on with the waterproofing spray by I think flywoo? Also is it worth it to put on a drone? Lastly is there a good brand that stands out for waterproof batteries?

Ohh https://www.betafpv.com/ has been down for the last 48h...

(COrrection it's back now)

Flying FPV drones with friends is so much fun!

Made some hoops, traffic cones and pool noodles - bashed into them a lot and took a few wet grass baths. I'm going to take my drone to the car wash to clean it. Happy flying everyone.

https://www.youtube.com/watch?v=1LVb3w7KyDw

Anyone have a Lipo just blowout like this mid flight? Lost power then video. Luckily at low elevation. Took about 45min to find the quad, got away with just one bent prop.

My only setting i had changed was switching the VTX from 200mW to 350mW as my video range was acting funny and not reaching as far as expected.

Not my favorite Lipos anyway... Good excuse to grab som R-Line V6 1000mah's.

I am buying a meteor75 pro as my first drone. I have 20 hrs on the sim. I was wondering what goggles i should get( i need them to match the 4:3 camera).

I think my drone has a vibration issue. (it could be the props 51477 props on a QAV-S 5" frame). I am waiting on some new slightly smaller 5.0" props hopefully it fixes the issue.

https://www.youtube.com/watch?v=xaaSF6KsHK8 (specifically look at the punch out at the start)