AnonyMouse

最近在线：5月4日 02:54

粉丝

已关注

赞同

帖子

I've loved everything remote control since as far back as I can remember. Growing up I bought as many RC cars and planes as my $3 a week allowance could save up for. My first drone was a Skyviper Nano m200 or something like that. Super fun lil guy. Newer versions were not nearly as good. My first FPV drone was an Eachine Racer 250. It got the job done for the most part, but left a lot to be desired. My first quality FPV drone was an analog Bardwell edition QAV V2 before the aluminum parts. Overall fine, but the Xilo components certainly fit under the budget moniker. Now I'm on a 3.5" Grinderino I built up myself.

动态

2025年7月30日 14:56

评论了

AnonyMouse

的帖子

Here's my version using a real old 2s whoop stack

I don't have DVR capability unfortunately
I'm in the middle of designing a version with some tweaks using what I've learned with this one's performance

2025年7月18日 00:19

发布了一篇帖子

Spent the last couple of months refining and tinkering on this with my friend

3D-Printed Micro Exploratory Drone

Around an hour of flight time

https://www.thingiverse.com/thing:7094546

2025年7月9日 17:53

评论了

rwaynecollins

的帖子

https://www.diyfpv.com/catalog?search=ymzfpv

2025年6月2日 13:21

评论了

IrisBombé

的帖子

I find it easiest to lean with my head back to make turning my head difficult enough to act as a reminder to sit still. Practicing in the SIM helped a lot

2025年5月31日 19:54

评论了

Pingi

的帖子

I've been on the same journey with the grinderino. The motor spec sheets I've looked up show a rather large efficiency and power increase with just that extra half inch

2025年5月30日 18:24

评论了

Pingi

的帖子

No personal experience, but from the stats and pics looks like it should be a nice lil ripper

2025年5月9日 14:24

在二手市场上架了商品：Diatone MAMBA TOKA 2203.5 3300KV Motor

Set of 4 Diatone Mamba TOKA 2203.5 3300Kv

New Unused Unaltered

Got these for a Grinderino, was super hyped and happy with em. (see my premature review 😅)

Went to install them aaand the motor spacing didn't work for the arms.

I'd forgotten to check, and these had the 16X16 mm, not the 12x12mm I needed.

Not trying to make any money off of the tariff stuff.

Just trying to get my money back and asking for the same as what I paid.

Shipping not included

$79.96

2025年2月14日 23:08

评论了

Zakory

的故障排查问题：Twitchy motors on arm

Probably a configuration issue. Maybe a couple of em.

First part could be needing to change min throttle/idle throttle

Second and related part could be needing to ensure you have the right info for you're motors in Betaflight. Maybe the number of poles/magnets is wrong?

Last thing I could think of is ESCs needing updated but I doubt it would be that.

2025年2月14日 15:40

评论了

Coopercharged

的帖子

You can limit the throttle and lower the rates making it less responsive
I would recommend ramping it back up slowly once you get comfortable to have better controllability

2025年2月13日 05:05

赞同了

WheeeFPV

在故障排查问题下的评论：After a hard crash the camera feed wont show even with a working camera plugged in. Pls help.

Everyone here is saying the camera is broken, no the connector for the camera is broken. Probably in your board. Try to direct solder it. The vtx is fine given you see the betaflight logo and not an image of static. Also verify the camera is getting power and whatnot.

2025年2月13日 04:48

评论了

uavfutures

的帖子

Still happily using analog and testing out HDZero after a friend kitted me out for Christmas with the monitor and an eco vtx.

DJI seems like it's going away in the US soon so I s'pose I'm glad I never had enough $ to buy in.

Would be awesome to have one of those lil rippers but I assume shipping to the states is pretty out of the question 😅

2025年2月12日 20:29

评论了

Crofton77

的帖子

@Crofton77 browsing around different motors at that size with listed test sheets, you are underpropping significantly. So you should be able to use however aggressive props that you like. The GF 2540-3 are the most "aggressive" propellers you have listed.

2025年2月11日 13:58

评论了

Uri-Nator87

的帖子

My understanding is the OSD won't work but you should be able to power the VTX etc. You may have to connect tx to rx to have it actually output video but I'd look up some YouTube videos to check on that.

2025年2月11日 13:44

评论了

Crofton77

的帖子

Simple size and shape says GF 2540-3. But that doesn't take into account if your motors will work with this size or the differing weights of prop materials. 14xx motors tend to go with slightly bigger 3-3.5" props.

2025年2月10日 15:00

评论了

jfpoulin

的帖子

HDZero costs the same for the free style with a camera.
If you have it, saving money would not be the reason to change.
The only relevant reasons for switching at this point would be if you're worried about DJI products being taken away by regulations, if want lower latency, or if you just dislike DJI as a company.

Edit: One other good reason for switching would be for flying in large groups where the bandwidth greediness of DJI is restrictive

2025年2月9日 18:56

发布了一篇帖子

Could the "Backpack" have a way to group components into different drones/setups?

That way folks can look in your backpack to see what you're running clearly. (Could have optional public visibility)

2025年2月9日 16:01

赞同了

uavfutures

在故障排查问题下的评论：Gofilm20 flips/runaway on initial throttle raise

ill answer this tomorrow on my live stream, i can run though a range of what it could be.

2025年2月9日 00:43

赞同了

VitroidFPV

在故障排查问题下的评论：What size bolts are used for a 3.5 inch prop?

M2x7mm bolts https://www.racedayquads.com/products/m2-x-7mm-steel-bolt-10pack-for-t-mount-props

The motors should come with some, but they are easy to loose, so spares are always good to have

2025年2月9日 00:43

赞同了

DanielF737

在故障排查问题下的评论：Does anyone know if the Radiomaster GX12 can take 21700 cell batteries?

Yep so definitely 18650s only

2025年2月9日 00:42

赞同了

LouisXVIII

在故障排查问题下的回复：What nuts am I supposed to use?

I read the question again and now I understand. I've never really heard of anyone having this problem before so that indicates bad nuts to me.

The first ones look fine, but I would just order some new ones. They're pretty cheap

AnonyMouse

早鸟