AnonyMouse

Zuletzt gesehen: 4. Mai, 02:54

Follower

Folge ich

Positive Bewertungen

Beiträge

I've loved everything remote control since as far back as I can remember. Growing up I bought as many RC cars and planes as my $3 a week allowance could save up for. My first drone was a Skyviper Nano m200 or something like that. Super fun lil guy. Newer versions were not nearly as good. My first FPV drone was an Eachine Racer 250. It got the job done for the most part, but left a lot to be desired. My first quality FPV drone was an analog Bardwell edition QAV V2 before the aluminum parts. Overall fine, but the Xilo components certainly fit under the budget moniker. Now I'm on a 3.5" Grinderino I built up myself.

Aktivitätsfeed

30. Juli 2025 um 14:56

Hat den Beitrag von

AnonyMouse

kommentiert

Here's my version using a real old 2s whoop stack

I don't have DVR capability unfortunately
I'm in the middle of designing a version with some tweaks using what I've learned with this one's performance

18. Juli 2025 um 00:19

Hat einen Beitrag erstellt

Spent the last couple of months refining and tinkering on this with my friend

3D-Printed Micro Exploratory Drone

Around an hour of flight time

https://www.thingiverse.com/thing:7094546

9. Juli 2025 um 17:53

Hat den Beitrag von

rwaynecollins

kommentiert

https://www.diyfpv.com/catalog?search=ymzfpv

2. Juni 2025 um 13:21

Hat den Beitrag von

IrisBombé

kommentiert

I find it easiest to lean with my head back to make turning my head difficult enough to act as a reminder to sit still. Practicing in the SIM helped a lot

31. Mai 2025 um 19:54

Hat den Beitrag von

Pingi

kommentiert

I've been on the same journey with the grinderino. The motor spec sheets I've looked up show a rather large efficiency and power increase with just that extra half inch

30. Mai 2025 um 18:24

Hat den Beitrag von

Pingi

kommentiert

No personal experience, but from the stats and pics looks like it should be a nice lil ripper

9. Mai 2025 um 14:24

Hat ein neues Inserat für ein Produkt hinzugefügt: Diatone MAMBA TOKA 2203.5 3300KV Motor.

Set of 4 Diatone Mamba TOKA 2203.5 3300Kv

New Unused Unaltered

Got these for a Grinderino, was super hyped and happy with em. (see my premature review 😅)

Went to install them aaand the motor spacing didn't work for the arms.

I'd forgotten to check, and these had the 16X16 mm, not the 12x12mm I needed.

Not trying to make any money off of the tariff stuff.

Just trying to get my money back and asking for the same as what I paid.

Shipping not included

$79.96

14. Februar 2025 um 23:08

Hat die Frage von

Zakory

zur Fehlerbehebung kommentiert: Twitchy motors on arm

Probably a configuration issue. Maybe a couple of em.

First part could be needing to change min throttle/idle throttle

Second and related part could be needing to ensure you have the right info for you're motors in Betaflight. Maybe the number of poles/magnets is wrong?

Last thing I could think of is ESCs needing updated but I doubt it would be that.

14. Februar 2025 um 15:40

Hat den Beitrag von

Coopercharged

kommentiert

You can limit the throttle and lower the rates making it less responsive
I would recommend ramping it back up slowly once you get comfortable to have better controllability

13. Februar 2025 um 05:05

Hat den Kommentar von

WheeeFPV

zu einer Frage zur Fehlerbehebung positiv bewertet: After a hard crash the camera feed wont show even with a working camera plugged in. Pls help.

Everyone here is saying the camera is broken, no the connector for the camera is broken. Probably in your board. Try to direct solder it. The vtx is fine given you see the betaflight logo and not an image of static. Also verify the camera is getting power and whatnot.

13. Februar 2025 um 04:48

Hat den Beitrag von

uavfutures

kommentiert

Still happily using analog and testing out HDZero after a friend kitted me out for Christmas with the monitor and an eco vtx.

DJI seems like it's going away in the US soon so I s'pose I'm glad I never had enough $ to buy in.

Would be awesome to have one of those lil rippers but I assume shipping to the states is pretty out of the question 😅

12. Februar 2025 um 20:29

Hat den Beitrag von

Crofton77

kommentiert

@Crofton77 browsing around different motors at that size with listed test sheets, you are underpropping significantly. So you should be able to use however aggressive props that you like. The GF 2540-3 are the most "aggressive" propellers you have listed.

11. Februar 2025 um 13:58

Hat den Beitrag von

Uri-Nator87

kommentiert

My understanding is the OSD won't work but you should be able to power the VTX etc. You may have to connect tx to rx to have it actually output video but I'd look up some YouTube videos to check on that.

11. Februar 2025 um 13:44

Hat den Beitrag von

Crofton77

kommentiert

Simple size and shape says GF 2540-3. But that doesn't take into account if your motors will work with this size or the differing weights of prop materials. 14xx motors tend to go with slightly bigger 3-3.5" props.

10. Februar 2025 um 15:00

Hat den Beitrag von

jfpoulin

kommentiert

HDZero costs the same for the free style with a camera.
If you have it, saving money would not be the reason to change.
The only relevant reasons for switching at this point would be if you're worried about DJI products being taken away by regulations, if want lower latency, or if you just dislike DJI as a company.

Edit: One other good reason for switching would be for flying in large groups where the bandwidth greediness of DJI is restrictive

9. Februar 2025 um 18:56

Hat einen Beitrag erstellt

Could the "Backpack" have a way to group components into different drones/setups?

That way folks can look in your backpack to see what you're running clearly. (Could have optional public visibility)

9. Februar 2025 um 16:01

Hat den Kommentar von

uavfutures

zu einer Frage zur Fehlerbehebung positiv bewertet: Gofilm20 flips/runaway on initial throttle raise

ill answer this tomorrow on my live stream, i can run though a range of what it could be.

9. Februar 2025 um 00:43

Hat den Kommentar von

VitroidFPV

zu einer Frage zur Fehlerbehebung positiv bewertet: What size bolts are used for a 3.5 inch prop?

M2x7mm bolts https://www.racedayquads.com/products/m2-x-7mm-steel-bolt-10pack-for-t-mount-props

The motors should come with some, but they are easy to loose, so spares are always good to have

9. Februar 2025 um 00:43

Hat den Kommentar von

DanielF737

zu einer Frage zur Fehlerbehebung positiv bewertet: Does anyone know if the Radiomaster GX12 can take 21700 cell batteries?

Yep so definitely 18650s only

9. Februar 2025 um 00:42

Hat die Antwort von

LouisXVIII

auf eine Frage zur Fehlerbehebung positiv bewertet: What nuts am I supposed to use?

I read the question again and now I understand. I've never really heard of anyone having this problem before so that indicates bad nuts to me.

The first ones look fine, but I would just order some new ones. They're pretty cheap

AnonyMouse

Early Bird