DanielF737

I have a new HDZero mob 6 with the AIO5 board and when the quad core temp hits about 60 degrees I completely lose video. VTX temps are still in the light blue in the indicator (second lowest level). I know its temp related because if I hit it with a fan for a few seconds the video will come back, but from a completely cold start I get like 15 seconds of video before it overheats.

I know this is atypical because I've seen youtube videos of people flying around fine both indoors and outdoors with core temps in the high 60s to 70s, vtx temps in the yellow to red and it stays on fine. Mine I can barely even take off before it overheats, sometimes there's not even enough time to calibrate so I can arm. All of this is at 25mW power too.

Anyone got any ideas on what I can do to fix this? Or is it just a busted board?

Gday, purchased a brand new Air 65 race spec (the 2025 refresh with the 5 in 1 board) and out of the box im having an issue where the throttle power feels inconsistent and the motor are making a stuttering/fluttering sound when power is applied. The quad tends to fly very inconsistently, usually shooting up quickly or at an angle, and occasionally I get motor runaway errors in the goggles. Its not flyable in its current state

Everything looks like its connected ok, I haven't touched pids/rates at all in betaflight (literally just took it out of the box and stuck a battery on), and there's no noticeable damage to the frame/props (brand new quad)

I found this thread on reddit that said potentially overtightened canopy screws might cause this, so I tried backing off the canopy screws, but that hasn't helped either

https://www.reddit.com/r/TinyWhoop/comments/1joj3ek/air65_freestyle_stuttering_out_of_the_box/

Props are all on in the right orientation, motor directions are correct, the motors sound fine when I spin them in betaflight, its just when I try fly the problem is present

Is there a way to get the goggles L (paired with the walksnail moonlight) to set the transmit power of the VTX to settings like 50mW, 100mW etc. At the moment my options go from 25mW straight to 200mW. Id like to have granular control at these lower output settings to more finely control the output power when flying with other pilot. Cant seem to find any info about this anywhere else online. Thanks!