After a hard crash, my analog goggles were still connecting to my air 65 but it was just a black screen with no osd. After a few power cycles the osd would come back with a grey screen but there would be no camera feed even with a camera that I know works plugged in. I hope the build in vtx isn't fried. Please help.
oof, that sounds an awful lot like a fried vtx. Can you try a different camera? Generally grey screen means camera issue, and no osd black screen is a vtx problem. If you have another camera, test with that one. Also redo the wiring on the camera if you feel like it, ynk.
oof, that sounds an awful lot like a fried vtx. Can you try a different camera? Generally grey screen means camera issue, and no osd black screen is a vtx problem. If you have another camera, test with that one. Also redo the wiring on the camera if you feel like it, ynk.
Looks like a fried vtx, sorry man. I would avoid ordering a replacement from betafpv if you can. The shipping took forever for me.
The Betaflight logo and OSD on a black screen indicates that it's the camera that's faulty....or you've left your lens cap on.
Losing both indicates Vtx might be gubbed.
You might need to resolder/check plug wiring (and check antenna).
there isnt any soldering on this analog build, its on a 1s aio board
yes it is plugged in and even when it isn't, it will still display video
@qwo99 A successful trouble shoot but not the result you hope for. It sounds like your vtx is fried
Everyone here is saying the camera is broken, no the connector for the camera is broken. Probably in your board. Try to direct solder it. The vtx is fine given you see the betaflight logo and not an image of static. Also verify the camera is getting power and whatnot.
ive tried a different camera but nothing happened, just the same outcome