Activity feed
January 22, 2025 at 11:55 PM
A quick couple flights this morning here in Florida after the snow. It was very windy.
January 13, 2025 at 1:07 AM
January 13, 2025 at 12:50 AM
January 10, 2025 at 11:13 PM
I second that suggestion. Every crash with a whoop is harmless, usually for the whoop also. When you crash a 3" or bigger, your at least bending a prop, maybe breaking an arm.
January 10, 2025 at 1:37 AM
This is the board with the video system taken off. The red light is always persistent with and there is a blinking orange light that comes on.
January 10, 2025 at 1:32 AM
The reason you can see the battery info is because that’s a completely seperate system than the camera feed, as the OSD gets added to whatever input signal it has from the camera and then it gives the signal plus the OSD to the VTX, so the Flight controller working, butyour camera is disconnected or broken
January 10, 2025 at 1:31 AM
Did you try to recalibrate?
https://www.youtube.com/watch?v=ri2sU7dd0II
Not sure on the EMAX E8 but on Pocket radio I can manually change outputs for sticks MIN / MAX.
January 10, 2025 at 1:31 AM
I dont have that transmitter, but i would plug it in to betaflight, go to receiver tab, and check what the inputs are doing. If you can recalibrate the gimbals on that transmitter i would do that too
January 10, 2025 at 1:31 AM
January 10, 2025 at 1:30 AM
Have you maybe soldered something wrong and then shorted the board? We need a picture
January 10, 2025 at 1:30 AM
could you take a quick video or picture for us?
January 10, 2025 at 1:30 AM
January 10, 2025 at 1:29 AM
have you tried changing the 5v to another?
January 10, 2025 at 1:29 AM
Keep trying to get it into DFU. If you can't find anything on that, than you might be screwed.
January 10, 2025 at 1:27 AM
January 10, 2025 at 1:27 AM
you can't rotate an analog camera digitally on the mob 8 you will just have to redo the canopy
January 10, 2025 at 1:27 AM