drmofsd

A quick couple flights this morning here in Florida after the snow. It was very windy.

https://youtu.be/KsJtP1GtyTk?si=RARjh5z06iFRFosi

I second that suggestion. Every crash with a whoop is harmless, usually for the whoop also. When you crash a 3" or bigger, your at least bending a prop, maybe breaking an arm.

This is the board with the video system taken off. The red light is always persistent with and there is a blinking orange light that comes on.

The reason you can see the battery info is because that’s a completely seperate system than the camera feed, as the OSD gets added to whatever input signal it has from the camera and then it gives the signal plus the OSD to the VTX, so the Flight controller working, butyour camera is disconnected or broken

Did you try to recalibrate?

https://www.youtube.com/watch?v=ri2sU7dd0II

Not sure on the EMAX E8 but on Pocket radio I can manually change outputs for sticks MIN / MAX.

I dont have that transmitter, but i would plug it in to betaflight, go to receiver tab, and check what the inputs are doing. If you can recalibrate the gimbals on that transmitter i would do that too

Have you maybe soldered something wrong and then shorted the board? We need a picture

could you take a quick video or picture for us?

have you tried changing the 5v to another?

Keep trying to get it into DFU. If you can't find anything on that, than you might be screwed.

you can't rotate an analog camera digitally on the mob 8 you will just have to redo the canopy