Brokefpv

Vu pour la dernière fois : 22 mars, 04:32

Abonnés

Abonnements

Votes positifs

Publications

Based in Rolleston, Canterbury I've been into fpv drones for about a year now. I haven't had a lot of time to hone my flying skills as much as I would like so still very much a beginner in that department. Have built several drones though which I really enjoy. Can also design and make my own carbon fibre frames which I also enjoy.

Fil d'activité

27 février 2025 à 06:14

A commenté le post de

jfpoulin

Exactly..

15 février 2025 à 05:05

A commenté le post de

Brokefpv

Thanks mate. Yeah seems to be the thing to do.. 👍

14 février 2025 à 08:24

A publié un post

..Swapped from analog to digital...

OK so I have a 3 inch quad I converted from analog to digital (walksnail).

All I did basically was to remove the analog vtx and wire in the walksnail and adjusted the uart accordingly and chose the preset for the OSD. Everything seems to be working but I still have the old vtx table showing on the vtx tab in betaflight.

Question is.. should I have started from scratch and reset the AIO after changing the vtx or can I just clear the vtx table somehow as it is no longer relevant.?

Thanks.

13 février 2025 à 05:01

A commenté le post de

uavfutures

I don't use DJI personally but I have seen a lot of people commenting on issue's they are having with durability and other teething problems. So for that reason alone I will stick with analog and Walksnail as my vtx choices.

10 février 2025 à 06:31

A commenté le post de

QuadSquatchFPV

A very capable little quad and can take a bit of abuse. Great in calm to light wind conditions but definitely struggles when the wind pics up but that's what you'd expect. Reasonable range and I've found good run time with 550mah batteries.

30 janvier 2025 à 05:55

A commenté le post de

Brokefpv

@Zakory sweet I'll have a look

27 janvier 2025 à 04:47

A publié un post

Recommendations for motor/prop combos please.

I want to build a whoop from scratch for some cinematic video including some indoor work.

I have a Pavo20 Pro bare frame as the bones. I want to run 3S packs.

The Pavo20 normally comes with the Lava 1104 7200kv motors. Are these still a good option for indoor cinematic shots if I fiddle with the rates and motor output or should I consider something else. I'm a but green on this part of the hobby so bare with me..

21 janvier 2025 à 06:04

A commenté le post de

flysquirrelFPV

@flysquirrelFPV it's really basic I didn't put a lot of thought into the design at the time as I just wanted something quick that would work. I do plan on refining it if you want to wait a little.

18 janvier 2025 à 06:24

A commenté le post de

flysquirrelFPV

It's a ripper of a quad. Agree with the battery lead comment. Also needs some better camera protection. I printed my own. Simple but effective.

16 janvier 2025 à 21:13

A commenté le post de

Pingi

As said just leave it as it is with the exception of some better protection for the camera. That's what I did with mine.

14 janvier 2025 à 17:37

A commenté le post de

ecto

I've had it for a while but can't get it to work properly with my radiomaster boxer so I have to use keyboard controlls which isn't as fun

14 janvier 2025 à 05:28

A commenté le post de

FJB57

@droned yes this is the only thing that works for me but it wasn't like this when the site first went live. Probably a bug that needs fixing @uavfutures

12 janvier 2025 à 02:24

A commenté le post de

TeleportFpv

Nice one..👍

12 janvier 2025 à 00:37

A commenté le post de

stinger

Try contacting some of the people through the Map feature. You can see if there is anyone near you and message them.

12 janvier 2025 à 00:29

A commenté le post de

QuadSquatchFPV

Cool vid. At least you didn't crash into the pond..😀

12 janvier 2025 à 00:27

A commenté le post de

M4R5_FPV

Nice. I've been wanting to try those supernova motors for some time but they are a little pricy for my liking. The T-Rex is a good camera so I definitely recommend it.

11 janvier 2025 à 21:59

A commenté le post de

jcon

I have had success removing the pins from the connector before using a jeweller's screwdriver. You could try that otherwise just buy a few new connectors from your local or aliexpress

11 janvier 2025 à 21:58

A commenté le post de

jcon

Haha cool little video.. 😎

11 janvier 2025 à 21:56

A commenté le post de

Kwod_Djoki

@uavfutures I'm on the map but I'm an Aussie living in New Zealand but had noticed nobody was from NT as yet..

11 janvier 2025 à 19:47

A commenté la question de dépannage de

Forol1561

: Flywoo nano baby 20

I couldn't find any files to help but I think designing your own is the way to go anyway..

Brokefpv

Explorer