12sem.
Message de discussion
Hello, I just recently built my first fpv drone and I ran into an issue.
Sometimes when I decrease the throttle on my remote the motors keep spinning at the same speed. I flashed the firmwere yesterday and it all seemed fine in betaflight. How do I fix this?
12sem.
is this when you first arm your drone. the motors spin at a minimum amount when you are armed.
Répondre
12sem.
Auteur
No, I arm the drone, then I add some throttle to check if everything works fine and when i lower the throttle the motors keep spinning at the same speed or start accelerating until I disarm the drone
Répondre
E
12sem. (modifié 12sem.)
Cette réponse a été supprimée et n'est plus disponible.
12sem.
If you arm your drone on the workbench with props off it will/can do that. Did it happen with props on trying to fly or on the bench?
Répondre
12sem. (modifié 12sem.)
Auteur
Cette réponse a été supprimée et n'est plus disponible.
12sem.
Same happened to me - I did some research and it seems that this can happen on the bench when you have the props off. At least that is what I hope it is as I have not done a test flight yet. 👍
Répondre
12sem.
Auteur
Ok, thank you for helping!
👍 1
Répondre
A
Laisser un commentaire