User image

Zed_L

Last seen: Sep 21, 17:59
Followers
2
Following
0
Upvotes
0
Posts
7
Im new to fpv, I only started flying on a simulator last year and I'm struggling to make my own fov drone

Activity feed

September 21, 2026 at 5:59 PM

Commented on
Mattylite's
post
Pls correct me if im wrong, but if your main priority is range wouldn't analog be better?

September 21, 2026 at 5:52 PM

Created a post

Have the wasp major 22.6-6.5 2020kv motors been discontinued?

I have recently broken my motor and i wanted to by another one, but it was out of stock at every online fpv store I knew exept for pyrodrone, but there I have to pay like 60 dollars for shipping. Does anyone know if the wasp major 22.6-6.5 2020kv motors are still in production and if there is any store with EU warehouses were I can buy them?

July 27, 2026 at 11:23 AM

Commented on
Zed_L's
post
ok, ty

July 26, 2026 at 9:40 AM

Commented on
Zed_L's
post
how do I know if the bearings are causing the issue?

July 26, 2026 at 9:37 AM

Commented on
Zed_L's
post
I feel a lot of friction and scrubbing at a certain point of the motor and I hear a clicking sound

July 22, 2026 at 5:43 PM

Commented on
Zed_L's
post
If u look at the right side of the motor you can see that it looks a little different 
Image posted by user

July 22, 2026 at 5:35 PM

Created a post

After I crashed my motor started making a weird noise when i turn it manually and the motor hub looks like it has shifted away from the center. Is there any way I can fix the motor or do i have to replace it?

July 15, 2026 at 10:29 AM

Commented on
Zed_L's
post
NVM, I plugged in my battery and it turned true

July 15, 2026 at 10:25 AM

Commented on
Zed_L's
post
Hire are some images of the wiring and the ports
Image posted by user
Image posted by user
Image posted by user

July 15, 2026 at 10:24 AM

Created a post

Why can't I get the "device ready" setting on my vtx to say true? Everything seems to be wired correctly and I have selected the right port, yet it still says "device ready false" in the video transmitter tab in betaflight. How do I fix this?

July 7, 2026 at 9:42 PM

Commented on
Zed_L's
post
I did a test flight today and everything worked perfectly, thank you all for helping me to finally get my fpv in the air!

July 7, 2026 at 4:48 PM

Commented on
Zed_L's
post
idk, it didn't ccome with mine, I bought the source one v5

July 7, 2026 at 2:48 PM

Commented on
Zed_L's
post
ok, thank you!

July 7, 2026 at 1:57 PM

Created a post

I forget to buy a lipo strap, is it okay to use zip ties instead? I know this seems like a stupid question but I don't want to risk damaging my batterys

July 7, 2026 at 1:45 PM

Commented on
Zed_L's
post
Ok, thank you for helping!

July 7, 2026 at 10:06 AM

Commented on
Zed_L's
post
Is that normal?

July 7, 2026 at 10:05 AM

Commented on
Zed_L's
post
No, I arm the drone, then I add some throttle to check if everything works fine and when i lower the throttle the motors keep spinning at the same speed or start accelerating until I disarm the drone

July 7, 2026 at 10:04 AM

Commented on
Zed_L's
post
It happened on the bench with the props off

July 7, 2026 at 9:11 AM

Created a post

Hello, I just recently built my first fpv drone and I ran into an issue.

Sometimes when I decrease the throttle on my remote the motors keep spinning at the same speed. I flashed the firmwere yesterday and it all seemed fine in betaflight. How do I fix this?

July 6, 2026 at 7:35 PM

Commented on
Zed_L's
post
It works!
I flashed the firmware and it worked!

Let's take flight together and elevate the world of FPV drones to new heights.

Community
Catalog
Support & Legal
© 2026 DIYFPV. All rights reserved.