Hello! I am having trouble with my Acrobee75 BNF from newbeedrone. The video drops out way sooner than it should, and the radio signal is always low. Any suggesstions?
For your VTx, since the video showed you already had the vtx at max power, I would recommend switching your Band to Raceband and your channel to channel 8. If that doesn't work you could upgrade all your vtx to have a RHCP omnidirectional antenna and your goggles to have a RHCP patch antenna and a omnidirectional antenna.
One reason your VTX might not be working good is if the drone was powered on but the VTX antenna was not plugged in. If the antenna is not plugged into the VTX,when the VTX is powered on, than the VTX will loose a lot of the range that it normally would have.
For the Elrs maybe try to turn up your radio transmitting power, or you could buy a more powerful external module and connect that to your radio.
I hope this helps you fix the problem!
hi. I aswered this on ym latest stream. BUT please confirm. your video is on f4 and then the comparison video is e1. You are changing your goggle frequency to match right?
eg when you fly on f4. your goggles are set to "f4" as well. yes?
Antenna and antenna cable are ok.
try with another antenna can not hurt.
and if this now occurs on 2 drones is perhaps something with the goggle antenna
Still experiencing the problem while on the correct band and channel... and now my hummingbird is experiencing the same problem... terrible range...!!!