Hey, your FC seems to be able to run an drone with 8 Motors. I guess you only need 4 Motors (so only one ESC). I do not know what cables you have exactly but my guess is, that you can plug in one of the cables in a way that connects to the ESC and leaves the pads for motor 5-8 empty on the flightcontroller side.

April 9, 2026 at 5:32 PM

Commented on

4d3FPV's

post

Did you power the drone by battery or only by USB of the flight controller for betaflight? Some flight controllers do not power all UARTs when connected to the PC.

February 15, 2026 at 11:14 PM

Commented on

Luca's

post

Hey. When you say no signal, is it static in the goggles or a black screen with the on-screen-display text visible? If it is the black screen check the camera connector (it could be loose).

December 29, 2025 at 11:53 AM

Commented on

qwo99's

post

I have one. It flies great and survived a lot of crashes with no damage to the frame.

December 26, 2025 at 12:17 AM

Commented on

uavfutures'

post

Merry Christmas everyone! 🎄🎄

December 11, 2025 at 5:06 PM

Commented on

WolfTW's

post

@WolfTW It seems aliexpress ships from the eachine official store

https://de.aliexpress.com/item/4000134327513.html

December 10, 2025 at 9:18 PM

Commented on

WolfTW's

post

@WolfTW Hey. I started analog with the Eachine EV800DM (Available on the Kaufland website). I like them. Still use them from time to time. Sadly their price went up from 80€ to 135€...

November 26, 2025 at 6:00 PM

Commented on

Habbershum676's

post

I had a similar problem with a bad solder joint on one of the motor pads on the ESC. Check if any of them are loose.

September 20, 2025 at 1:52 PM

Commented on

Rocketeer's

post

Hey. That Depends on your eyes. In my case I am nearsighted (+ astigmatism. Highest value -5.0).
I have 3 googles:
- EV800dm Box goggles: works fine without glasses
- Skyzone O3O: had to have custom lenses made
- DJI Googles3: Works fine with the inbuilt diopter adjustment + the included -2 lenses
I hope this can serve as a refrence.

September 3, 2025 at 5:32 PM

Commented on

BagelFPV's

post

I noticed the website does not post pictures above a certain size / resolution. It worked for me after i downscaled the picture a few times. I guess this is intended, but i would expect an error message when a picture is rejected due to size.

August 12, 2025 at 3:33 PM

Commented on

jfpoulin's

post

Hey i used https://github.com/ponchio/untrunc for the files from my Runcam Thumb. it should work the same for mp4 files from DJI.

June 28, 2025 at 5:07 PM

Resolved

matzem's

troubleshoot question Mobula6 2024 has weird twitches

Hey,

thank you all for your help.

I managed to fix it by going to the Happymodel manual and resetting my config back to the values shown there. (How did I not think of this myself???)

https://www.happymodel.cn/wp-content/uploads/2024/01/Mobula6-2024-1S-65mm-micro-fpv-whoop-manual.pdf

(Except or the First gyro angle. the manual shows 0°, but it is 90° on my whoop for some reason...)

June 28, 2025 at 5:06 PM

Commented on

matzem's

troubleshoot question Mobula6 2024 has weird twitches

Hey,

thank you all for your help.

I managed to fix it by going to the Happymodel manual and resetting my config back to the values shown there. (How did I not think of this myself???)

https://www.happymodel.cn/wp-content/uploads/2024/01/Mobula6-2024-1S-65mm-micro-fpv-whoop-manual.pdf

(Except or the First gyro angle. the manual shows 0°, but it is 90° on my whoop for some reason...)

June 28, 2025 at 2:01 PM

Replied to

ecsFPV's

comment on a troubleshoot question Mobula6 2024 has weird twitches

Hey, to start with here are my ESC Settings.

June 27, 2025 at 7:00 PM

Asked a troubleshoot question Mobula6 2024 has weird twitches

Mobula6 2024 has weird twitches

Hey,

does anyone have an idea what is wrong with my mobula6? Here is some DVR showing the twiches.

https://drive.google.com/file/d/1fW5mMIbSeJQvaS42cBqddw-g-ska40OM/view?usp=drive_link

(Be careful with your volume. Loud analog sounds)

I already replaced all 4 motors. It did not help...

Thanks in advance!

June 7, 2025 at 10:00 PM

Commented on

Tintenfisch102's

post

Hey, I use the Whoopstore V3 with a 100W USB C Charger and cable. works awesome.

May 16, 2025 at 2:19 PM

Commented on

Noob's

post

Hey,

what packet rate have you set in your pocket elrs settings? The higher it it the less range you have. I set mine to 250Hz for a good middle ground between range and latency.