matzem
Última visita: 21 oct, 17:16
Seguidores
3Siguiendo
0Votos positivos
1Publicaciones
1Aún no hay biografía...
Feed de actividad
7 de septiembre de 2026 a las 19:50
Ha comentado la publicación de
Is it connected to a battery or only to the usb cable? some flight controllers do not supply all UARTs with power when plugged in via usb. Are the receiver LEDs on?
9 de julio de 2026 a las 18:20
Ha comentado la publicación de
I had the same issue with my GEPRC Mark5, I hat to remove the S-Bus wire from the O4 Pro cables to get it to work.
4 de julio de 2026 a las 23:44
Ha comentado la publicación de
Hey, if i recall correctly hdzero does not recommend changing the tx power via betaflight/smart audio. have you tried changing the vtx power with the OSD menu? you can access it with this stick command (center your sticks and execute the gesture on the picture while disarmed) for more info: https://hd-zero.github.io/hdzero-vtx-docs/latest/vtx_user_manual/
3 de julio de 2026 a las 14:48
Ha comentado la publicación de
I would say follow the guide and everthing extra is free stuff^^. My guess is, that the small standoff thingys and some of the extra screws are for mounting a small single board vtx. I used this guide for my build: https://www.youtube.com/watch?v=XAzNhubDp2o
25 de junio de 2026 a las 17:44
Ha comentado la publicación de
@BrickFPV it is either the cables or the motor is just dirty or bent. that is fairly normal for tiny whoop motors after you have flown (and crashed) them for a while.
25 de junio de 2026 a las 17:26
Ha comentado la publicación de
the plugs should not be the problem. perhaps it is just a broken cable? I would probably just get one new motor und try switching it. Worst case, if it does not help, you have a spare one for the future^^
25 de junio de 2026 a las 17:18
Ha comentado la publicación de
it looks like something is happening with the back right motor. Have you checked if there is something wrong with the cables there? if the motor is direct soldered it could be a loose solder joint. (that was the cause for this problem on my 5inch drone)
9 de junio de 2026 a las 15:16
Ha comentado la publicación de
@BmanFPV Hey. the other posibillities I can think of are:
- Your OSD Video Format is set to HD
- there are no selected OSD Elemnts in the active OSD Profile (check the Active OSD Profile is the right one)
- You have set up a switch for "hide OSD/ OSD Disable" in the Modes tab and it is always active
7 de junio de 2026 a las 18:42
Ha comentado la publicación de
when you flashed beta flight, did you select OSD-Protocol: Analog?
19 de abril de 2026 a las 19:51
Ha comentado la publicación de
Hey, when i look for stores in my country I reference this website a lot:
18 de abril de 2026 a las 14:37
Ha comentado la publicación de
Hey, your FC seems to be able to run an drone with 8 Motors. I guess you only need 4 Motors (so only one ESC). I do not know what cables you have exactly but my guess is, that you can plug in one of the cables in a way that connects to the ESC and leaves the pads for motor 5-8 empty on the flightcontroller side.
9 de abril de 2026 a las 17:32
Ha comentado la publicación de
Did you power the drone by battery or only by USB of the flight controller for betaflight? Some flight controllers do not power all UARTs when connected to the PC.
15 de febrero de 2026 a las 23:14
Ha comentado la publicación de
Hey. When you say no signal, is it static in the goggles or a black screen with the on-screen-display text visible? If it is the black screen check the camera connector (it could be loose).
29 de diciembre de 2025 a las 11:53
Ha comentado la publicación de
I have one. It flies great and survived a lot of crashes with no damage to the frame.
26 de diciembre de 2025 a las 0:17
Ha comentado la publicación de
Merry Christmas everyone! 🎄🎄
11 de diciembre de 2025 a las 17:06
Ha comentado la publicación de
10 de diciembre de 2025 a las 21:18
Ha comentado la publicación de
@WolfTW Hey. I started analog with the Eachine EV800DM (Available on the Kaufland website). I like them. Still use them from time to time. Sadly their price went up from 80€ to 135€...
26 de noviembre de 2025 a las 18:00
Ha comentado la publicación de
I had a similar problem with a bad solder joint on one of the motor pads on the ESC. Check if any of them are loose.
20 de septiembre de 2025 a las 13:52
Ha comentado la publicación de
Hey. That Depends on your eyes. In my case I am nearsighted (+ astigmatism. Highest value -5.0).
I have 3 googles:
- EV800dm Box goggles: works fine without glasses
- Skyzone O3O: had to have custom lenses made
- DJI Googles3: Works fine with the inbuilt diopter adjustment + the included -2 lenses
I hope this can serve as a refrence.
I have 3 googles:
- EV800dm Box goggles: works fine without glasses
- Skyzone O3O: had to have custom lenses made
- DJI Googles3: Works fine with the inbuilt diopter adjustment + the included -2 lenses
I hope this can serve as a refrence.
3 de septiembre de 2025 a las 17:32
Ha comentado la publicación de
I noticed the website does not post pictures above a certain size / resolution. It worked for me after i downscaled the picture a few times. I guess this is intended, but i would expect an error message when a picture is rejected due to size.