matzem
Ultimo accesso: 21 ott, 17:16
Follower
3Seguiti
0Voti positivi
1Post
1Non c'è ancora una biografia...
Feed attività
7 settembre 2026 alle ore 19:50
Ha commentato il post di
Is it connected to a battery or only to the usb cable? some flight controllers do not supply all UARTs with power when plugged in via usb. Are the receiver LEDs on?
Hey, if i recall correctly hdzero does not recommend changing the tx power via betaflight/smart audio. have you tried changing the vtx power with the OSD menu? you can access it with this stick command (center your sticks and execute the gesture on the picture while disarmed) for more info: https://hd-zero.github.io/hdzero-vtx-docs/latest/vtx_user_manual/
I would say follow the guide and everthing extra is free stuff^^. My guess is, that the small standoff thingys and some of the extra screws are for mounting a small single board vtx. I used this guide for my build: https://www.youtube.com/watch?v=XAzNhubDp2o
it looks like something is happening with the back right motor. Have you checked if there is something wrong with the cables there? if the motor is direct soldered it could be a loose solder joint. (that was the cause for this problem on my 5inch drone)
@BmanFPV Hey. the other posibillities I can think of are:
- Your OSD Video Format is set to HD
- there are no selected OSD Elemnts in the active OSD Profile (check the Active OSD Profile is the right one)
- You have set up a switch for "hide OSD/ OSD Disable" in the Modes tab and it is always active
19 aprile 2026 alle ore 19:51
Ha commentato il post di
Hey, when i look for stores in my country I reference this website a lot:
Hey, your FC seems to be able to run an drone with 8 Motors. I guess you only need 4 Motors (so only one ESC). I do not know what cables you have exactly but my guess is, that you can plug in one of the cables in a way that connects to the ESC and leaves the pads for motor 5-8 empty on the flightcontroller side.
26 dicembre 2025 alle ore 00:17
Ha commentato il post di
Merry Christmas everyone! 🎄🎄
26 novembre 2025 alle ore 18:00
Ha commentato il post di
I had a similar problem with a bad solder joint on one of the motor pads on the ESC. Check if any of them are loose.
Hey. That Depends on your eyes. In my case I am nearsighted (+ astigmatism. Highest value -5.0).
I have 3 googles:
- EV800dm Box goggles: works fine without glasses
- Skyzone O3O: had to have custom lenses made
- DJI Googles3: Works fine with the inbuilt diopter adjustment + the included -2 lenses
I hope this can serve as a refrence.
I have 3 googles:
- EV800dm Box goggles: works fine without glasses
- Skyzone O3O: had to have custom lenses made
- DJI Googles3: Works fine with the inbuilt diopter adjustment + the included -2 lenses
I hope this can serve as a refrence.
I noticed the website does not post pictures above a certain size / resolution. It worked for me after i downscaled the picture a few times. I guess this is intended, but i would expect an error message when a picture is rejected due to size.