NullNullZero

Ostatnio widziano: 6 cze, 11:17

Obserwujący

Obserwowani

Głosy za

Wpisy

Austrian 5" and 65mm whoop pilot, 17, upcoming mechatronics engineer

Kanał aktywności

16 kwietnia 2025 08:00

Skomentowano post użytkownika

jcon

I have to resolder my motor wires every ~10 flights, I feel you🤣

8 kwietnia 2025 11:42

Skomentowano post użytkownika

GanDad

its great for whoops, but if you do a bit of freestyle, it feels much better if you adjust the settings a bit

31 marca 2025 21:30

Skomentowano post użytkownika

proantifpv

with elrs, you should take a look at https://www.expresslrs.org/quick-start/binding/

31 marca 2025 19:57

Skomentowano post użytkownika

hoverfish

rhcp and linear work together, while rhcp and lhcp dont work at all together. This has nothing to do with HDZ/analog, it's all about the antenna on the VRX, its probably just for cost reasons. Also, I think there are smaller HDZ VTX that use linear antennas

31 marca 2025 19:55

Skomentowano post użytkownika

Kcfpv

I know someone who kinda works with them and it seems like they are really moving forward.

31 marca 2025 19:54

Skomentowano post użytkownika

proantifpv

cons: it can be buggy and is not officially supported by betaflight afaik. If youre on android, you can get normal betaflight as an apk on their github, its far superior

29 marca 2025 16:40

Skomentowano post użytkownika

Uri-Nator87

I'd say isopropyl, or would that chemically attack the lens somehow?

28 marca 2025 20:47

Skomentowano post użytkownika

TeleportFpv

I'm excited to see the finished build

28 marca 2025 20:44

Skomentowano post użytkownika

NullNullZero

Little update, I played around with the settings a bit and adjusted them to my rates, its working way better now. Also, wdym if its assigned to a switch/button? Crash recovery is for not crashing after bumping in walls (auto levels for a short time), unlike turtle mode which flips your quad after crashing, maybe you confused those :)

16 marca 2025 21:29

Dodano recenzję produktu Happymodel Mobula 6 2024 camera holder

Super durable

Bought it to replace my air65 canopy, I crashed a lot but I still didn't have to change it... I had to cut a tiny part off because of the vtx antenna, was no problem. Would absolutely recommend it.

16 marca 2025 21:05

Dodano recenzję produktu HOTA D6 CHARGER DC650W 2X 15A

Great

Bought it after my isdt 608ac gave up, so far I love it... It's not the pro version, so it doesnt come with a psu and it's huge, that's why I leave it on my desk (if I don't need to take it anywhere). Since I have it on my desk, the wireless charging feature is nice to have, and the dual channel charging is also really nice. I'd probably recommend the pro version, I just bought the normal one because it was cheaper and I have enough psus

16 marca 2025 21:00

Opublikowano post

Hi tinywhoop pilots, do yall use crash recovery? I use it and I mainly fly indoors, but sometimes it falsely triggers during tricks. I adjusted it a bit, should work better now, but I wonder if you guys use it and like it, and if you think it's a crucial feature for whoops

16 marca 2025 20:57

Skomentowano post użytkownika

WX580

Is it alright? Seems like it didn't crash too hard into the ground

16 marca 2025 20:54

Skomentowano post użytkownika

Therealduck

In theory it's not, but it can survive some water. If you want to be safer, coat the board in 442c (you can get it on amazon). I use isopropyl alcohol to clean my board, but do you mean by "touching" just casually touching the board? That's absolutely no problem (if your hands aren't completely wet), we do that all the time when we solder for example, don't worry about that.

18 lutego 2025 19:54

Polubiono pytanie użytkownika

Forol1561

w dziale Rozwiązywanie problemów: how many amps is too many...

18 lutego 2025 19:54

Polubiono komentarz użytkownika

LouisXVIII

pod pytaniem w dziale Rozwiązywanie problemów: how many amps is too many...

So in theory this battery could pull 531A, but that C rating is likely padded and no drone would pull that much. Worrying about the wire is more of a concern, Google says 10awg wire is rated for 30A at 60C so I would not recommend using this for a drone.

3 lutego 2025 20:47

Skomentowano post użytkownika

Luki

Mit meinem 5" flieg ich gerne bei Schottergruben, frag mich besser nicht wie legal das ganze ist... Mach ich auch nur am Wochenende, da ist die Chance niedriger dass wer da ist

3 lutego 2025 20:45

Skomentowano post użytkownika

Luki

Would you bother sharing some of your old spots? I'm still looking for some, I'm in vienna/Lower Austria near Vienna. Also, what drone size do you fly?

2 lutego 2025 14:57

Skomentowano post użytkownika

stinger

Only if you can't afford the skyzone cobra x

1 lutego 2025 23:22

Dodano recenzję produktu TS100 Soldering Tip C4

For big pads

I use it mainly for soldering xt60 leads and motor wires (on my 5"), perfect size for that kind of soldering jobs