Imagen de portada del usuario
Imagen de usuario

NullNullZero

Última visita: 6 jun, 11:17
Seguidores
6
Siguiendo
8
Votos positivos
2
Publicaciones
2
Austrian 5" and 65mm whoop pilot, 17, upcoming mechatronics engineer

Feed de actividad

16 de abril de 2025 a las 8:00

Ha comentado la publicación de
jcon
I have to resolder my motor wires every ~10 flights, I feel you🤣

8 de abril de 2025 a las 11:42

Ha comentado la publicación de
GanDad
its great for whoops, but if you do a bit of freestyle, it feels much better if you adjust the settings a bit

31 de marzo de 2025 a las 21:30

Ha comentado la publicación de
proantifpv
with elrs, you should take a look at https://www.expresslrs.org/quick-start/binding/

31 de marzo de 2025 a las 19:57

Ha comentado la publicación de
hoverfish
rhcp and linear work together, while rhcp and lhcp dont work at all together. This has nothing to do with HDZ/analog, it's all about the antenna on the VRX, its probably just for cost reasons. Also, I think there are smaller HDZ VTX that use linear antennas

31 de marzo de 2025 a las 19:55

Ha comentado la publicación de
Kcfpv
 I know someone who kinda works with them and it seems like they are really moving forward.

31 de marzo de 2025 a las 19:54

Ha comentado la publicación de
proantifpv
cons: it can be buggy and is not officially supported by betaflight afaik. If youre on android, you can get normal betaflight as an apk on their github, its far superior

29 de marzo de 2025 a las 16:40

Ha comentado la publicación de
Uri-Nator87
I'd say isopropyl, or would that chemically attack the lens somehow?

28 de marzo de 2025 a las 20:47

Ha comentado la publicación de
TeleportFpv
I'm excited to see the finished build

28 de marzo de 2025 a las 20:44

Ha comentado la publicación de
NullNullZero
Little update, I played around with the settings a bit and adjusted them to my rates, its working way better now. Also, wdym if its assigned to a switch/button? Crash recovery is for not crashing after bumping in walls (auto levels for a short time), unlike turtle mode which flips your quad after crashing, maybe you confused those :)

16 de marzo de 2025 a las 21:29

Ha dejado una reseña del producto Happymodel Mobula 6 2024 camera holder

Super durable

Bought it to replace my air65 canopy, I crashed a lot but I still didn't have to change it... I had to cut a tiny part off because of the vtx antenna, was no problem. Would absolutely recommend it.

16 de marzo de 2025 a las 21:05

Ha dejado una reseña del producto HOTA D6 CHARGER DC650W 2X 15A

Great

Bought it after my isdt 608ac gave up, so far I love it... It's not the pro version, so it doesnt come with a psu and it's huge, that's why I leave it on my desk (if I don't need to take it anywhere). Since I have it on my desk, the wireless charging feature is nice to have, and the dual channel charging is also really nice. I'd probably recommend the pro version, I just bought the normal one because it was cheaper and I have enough psus

16 de marzo de 2025 a las 21:00

Ha creado una publicación

Hi tinywhoop pilots, do yall use crash recovery? I use it and I mainly fly indoors, but sometimes it falsely triggers during tricks. I adjusted it a bit, should work better now, but I wonder if you guys use it and like it, and if you think it's a crucial feature for whoops

16 de marzo de 2025 a las 20:57

Ha comentado la publicación de
WX580
Is it alright? Seems like it didn't crash too hard into the ground

16 de marzo de 2025 a las 20:54

Ha comentado la publicación de
Therealduck
In theory it's not, but it can survive some water. If you want to be safer, coat the board in 442c (you can get it on amazon). I use isopropyl alcohol to clean my board, but do you mean by "touching" just casually touching the board? That's absolutely no problem (if your hands aren't completely wet), we do that all the time when we solder for example, don't worry about that. 

18 de febrero de 2025 a las 19:54

Ha votado a favor de la pregunta de
Forol1561
en Solución de problemas: how many amps is too many...

18 de febrero de 2025 a las 19:54

Ha votado a favor del comentario de
LouisXVIII
en una pregunta de Solución de problemas: how many amps is too many...

So in theory this battery could pull 531A, but that C rating is likely padded and no drone would pull that much. Worrying about the wire is more of a concern, Google says 10awg wire is rated for 30A at 60C so I would not recommend using this for a drone.

3 de febrero de 2025 a las 20:47

Ha comentado la publicación de
Luki
Mit meinem 5" flieg ich gerne bei Schottergruben, frag mich besser nicht wie legal das ganze ist... Mach ich auch nur am Wochenende, da ist die Chance niedriger dass wer da ist

3 de febrero de 2025 a las 20:45

Ha comentado la publicación de
Luki
Would you bother sharing some of your old spots? I'm still looking for some, I'm in vienna/Lower Austria near Vienna. Also, what drone size do you fly? 

2 de febrero de 2025 a las 14:57

Ha comentado la publicación de
stinger
Only if you can't afford the skyzone cobra x

1 de febrero de 2025 a las 23:22

Ha dejado una reseña del producto TS100 Soldering Tip C4

For big pads

I use it mainly for soldering xt60 leads and motor wires (on my 5"), perfect size for that kind of soldering jobs

Volemos juntos y llevemos el mundo de los drones FPV a nuevas alturas.

Comunidad
Catálogo
Soporte y legal
© 2026 DIYFPV. Todos los derechos reservados.