Forol1561

Laatst gezien: 30 sep, 07:28

Volgers

Volgend

Upvotes

Berichten

professional yapper/screw destroyer

Activiteitenfeed

27 juli 2026 om 21:37

Heeft een bericht geplaatst

https://www.tiktok.com/@forol1561/video/7667219196459240726

I'm still a bit flabbergasted that this is a 50g 1.8inch

7 mei 2026 om 20:30

Heeft gereageerd op het bericht van

Forol1561

don't worry... it took me YEARS AND YEARS to save up for my 2inch.... lmao it's just that maintanance isn't as expensive as the big boy quads... ESPECIALLY when you fly carefully.... I was learning on a pirated version of Liftoff micros for a LOOONG long time.... I actually just bought it officially only like a few months ago.... since I really wanted to support them for all the pain and money they saved me by being able to learn to fly in their sim first (point is... you will get there eventually... dw.. just be patient and save up little by little)

7 mei 2026 om 19:46

Heeft gereageerd op het bericht van

Forol1561

@DroneKoorts also... isn't it cheating when my camera angle in the sim was like 55° during the race?

7 mei 2026 om 19:39

Heeft gereageerd op het bericht van

Forol1561

tbf I don't really do many catastrophic crashes..... and since it's a 2 inch the costs are quite managable even for a broke ass dude like me, if I manage to trash my VTX new one costs like 50€ or I send it back to cadxx for repair.... (I fly the Walksnail 1S kit) and other than that... the motors are really good quality.... instead of the motor bell bending... the whole ass motor bends and still spins smoothly.... + these flywoo motors have solder pads so even when I rip off a wire on acciedent... I can just solder new ones on without having to replace the entire motor.... the AIO is sturdy as HELL too... I also waterproof all my drones... ever since my battery died once right on top of a small body of deep water...... overall most of the costs included were my mistakes.... like the first time I blew up a VTX was because I assumed I don't need a capacitor on a 2inch and I turtle moded.... eversince then the VTX is connected to the AIO's 9V BEC and I added a cap... etc.

7 mei 2026 om 19:13

Heeft gereageerd op het bericht van

Forol1561

Thanks!!! I was actually SUPER surprised as well LMAO... also to answer your question... I do fly around the ranch with my 50g 2inch.... hitting gaps and stuff... and I did practice in the Sim before I got my quad.... but it was never full blown racing... most of the time just chill precission training, the one thing that might be similar is when I practiced my imaginary race track in liftoff micros like a year and a half ago.... but no timing just slow precission training... and I was preaty shit at it....

7 mei 2026 om 09:57

Heeft een bericht geplaatst

First time trying some Racing, this was after 1.5H in liftoff micros, any tips? https://www.youtube.com/watch?v=LSNznWLS1Wg

#tinywhoop #simracing

30 augustus 2025 om 12:35

Heeft een bericht geplaatst

NEW LED STRIP??? READY TO RIP!!!

+ 1 more

30 augustus 2025 om 12:25

Heeft een bericht geplaatst

https://youtu.be/HOE4YzSfvZo

14 augustus 2025 om 20:16

Heeft de reactie van

ecs05

op een vraag bij Problemen oplossen een upvote gegeven: TX16S MKII internal module faulty?

It seems likely that the fault lies in the power supply of the internal module. Without a circuit diagram, it is difficult to narrow down the possible components. Try contacting RM support. They have the measurement points and their values.

27 juli 2025 om 20:43

Heeft geantwoord op de reactie van

ecsFPV

op een vraag bij Problemen oplossen: TX16S MKII internal module faulty?

the new internal module works as long as it gets power from the external module, haven't been able to figure out where the issue is on the mainboard

11 juni 2025 om 00:30

Heeft gereageerd op de vraag van

Forol1561

bij Problemen oplossen: TX16S MKII internal module faulty?

the thing is... external modules work.....

11 juni 2025 om 00:29

Heeft een vraag gesteld bij Problemen oplossen: TX16S MKII internal module faulty?

TX16S MKII internal module faulty?

hi so... my old internal 4in1 module died in my tx16s... I ordered a new one... and it arived dead..... am I to asume there is a bit more to it than that? and either something is killing them or this was just a coinsidance EDIT: it's the mainboard 2S rail that's damaged, any ideas?

19 mei 2025 om 20:54

Heeft een recensie geschreven over het product Walksnail Redbird Antenna For Avatar HD Goggles (2pcs)

horrible antena....

horrible antena.... inconsistent af....

19 mei 2025 om 20:52

Heeft een recensie geschreven over het product Walksnail Digital HD Mini 1S VTX/Camera Kit for Walksnail Avatar HD Goggles

well.... durable AF

well.... durable AF been forgotten in a forrest in rain and snow for like half a year and still works... then did a turtle mode and it got fried.... xd so it's kinda 50/50 but mostly durable af

19 mei 2025 om 20:49

Heeft een recensie geschreven over het product Gemfan Hurricane 2015-2 PC 1.5mm shaft Durable 2-Blade Prop 4CW+4CCW - Choose Color

great little props.... quite durable too for the size

26 april 2025 om 00:00

Heeft het antwoord van

LouisXVIII

op een vraag bij Problemen oplossen een upvote gegeven: Cooked walksnail 1s vtx (V3)

Did you wire it? If so, where did you wire it to? I think all of the 1s vtxs are rated for 3.1-13v, so its impossible for a 2s quad to make enough voltage to fry it... right? Unless you plugged in a higher voltage battery of course.

Also, if its a bnf and it just smoked when you plugged in. They should totally replace it.

3 april 2025 om 11:37

Heeft geantwoord op de reactie van

LouisXVIII

op een vraag bij Problemen oplossen: Cooked walksnail 1s vtx (V3)

ye.... it's a bnf and I didn't wire it... I just noticed the shitty wiring when I took it apart... also.. it's a 2S lihv... and at peak... it can do like 35A .... even tho it's a 2inch.... and.... THEY DIDN'T EVEN USE A CAPACITOR... + the AIO that THEY themselves make.... has a port for shit like dji HD.... which u can use for literary all other VTX's too.... + it has a 2A 9V buck converter... that u can turn on an off.... so not only stable voltage but it won't overheat 5seconds into plugging it in.... (edit... I did message them... they didn't respond yet.. but I'd be more than ok with just a new vtx... cause god damn...)

3 april 2025 om 11:33

Heeft gereageerd op het bericht van

Nitetrain20

also... first thing to do with a charger (especially toolkitrc) calibrate it... so it doesn't fck up ur batteries xd

3 april 2025 om 11:31

Heeft gereageerd op het bericht van

Nitetrain20

get some 18650 liion cells or a liion pack, with some quality cells and ur good, (liion cells have a lot higher energy density compared to lipo)

2 april 2025 om 15:40

Heeft geantwoord op de reactie van

daedalusfpv

op een vraag bij Problemen oplossen: Cooked walksnail 1s vtx (V3)

not really.... nope... if I had a thermal camera I bet it would be a breze to diagnose the faulty component....

Forol1561

Early Bird