T
Drone Drifting After Motor and ESC Replacement - Help Needed
I recently had to replace a motor and the esc on my drone. Now this drone after reseting everything does not fly properly. I can arm it, then hover. But once I start moving I think one of the motors kicks in a bit more than the others and makes the drone drift quickly to one one side and crash. Does anyone have a idea why this would be happening?
26 t.
Does it only slightly drift? or does it go out of control completely?
The latter could be an issue with Gyro-Orientation.
Also check if you accidently trimt your inputs on your remote if it is just a "slight" drift.
The latter could be an issue with Gyro-Orientation.
Also check if you accidently trimt your inputs on your remote if it is just a "slight" drift.
Odpowiedz
T
26 t.
Autor
It goes completely out of control. I think you might be right. But the thing is I've calibrated the drone on a flat surface. Is there a different thing I can do?
Odpowiedz
26 t.
I dont mean the calibration. But the orientation - check in the main screen after connecting if everything moves as expected :)
Odpowiedz
26 t. (zaktualizowano 26 t.)
Multiple ideas: like already mentioned gyro alignment, motor directions, motor order, props wrong direction
Odpowiedz
A
Dodaj komentarz