10 W
Diskussionsbeitrag
After I crashed my motor started making a weird noise when i turn it manually and the motor hub looks like it has shifted away from the center. Is there any way I can fix the motor or do i have to replace it?
10 W
Autor
If u look at the right side of the motor you can see that it looks a little different
Antworten
10 W
If it spins freely-ish, run it (I can't really see from the pic). Otherwise you may have to replace the motor :( or at the very least the bell.
Antworten
9 W
Autor
I feel a lot of friction and scrubbing at a certain point of the motor and I hear a clicking sound
Antworten
10 W
10 W
If it’s just the bearings are shot then fasteddies bearings will have replacements on the cheap. You just need to find what size your motor uses.
Antworten
9 W
Autor
how do I know if the bearings are causing the issue?
👍 1
Antworten
9 W
Remove the motor bell and place a screw driver through the bearings and roll the bearings with the shaft of the driver. They should be totally smooth. And have basically no noise. Another way is to remove the props. And turn on turtle mode and move the right stick towards each corner which will spin up one motor at a time. And listen for any grinding or popping sounds. They should be totally smooth. Just a whining sound of the motor rotating.
Antworten
9 W
Autor
ok, ty
👍 1
Antworten
9 W
looks like burned
Antworten
A
Kommentar hinterlassen