DNRAU

最近在线：8月27日 08:00

粉丝

已关注

赞同

帖子

暂无简介…

动态

2025年5月11日 02:24

在二手市场上架了商品：

As New Walk Snail Goggles L

As new Caddx Walksnail Goggles L, used 3 times before i upgraded to the Goggles X (needed adjustable lenses).

Comes with all original components in box.

Excellent entry headset for Digital FPV.

Purchased from FPVfaster Oct 14th 2024

A$300.00

2025年4月8日 12:07

评论了

GanDad

的帖子

I run these for crash recovery on my air65/75 and 2S meteor 85WS (Stolen from CiottiFPV), i fly full acro and allows me to do freestyle without interference from the crash recovery, but when i tank it usually saves it.

set crash_dthreshold = 80

set crash_gthreshold = 600

set crash_setpoint_threshold = 500

set crash_recovery_rate = 200

set crash_recovery = ON

2025年3月30日 05:50

评论了

DNRAU

的帖子

Yeh nice to know, im always worried if its not secure its lost :D

2025年3月29日 10:56

评论了

DNRAU

的帖子

i'd sort out a 3D print i think, something that allows me to have a decent Antenna as well.
The Flyfish M10 also looks good and slightly smaller

2025年3月29日 03:21

发布了一篇帖子

Hey guys, looking for some advice, Im building an analogue 3.5" (will convert to walksnail down the track) into the Volador frame, just for some light freestyle, everything apart from the VTX has arrived, but im now thinking it might be worth adding a GPS.

Anyone have any recommendations on a GPS that's decent and lightweight?

i was looking at the HGLRC Mini M100, but i know nothing about GPS so no idea what to even look for

2025年3月14日 07:16

评论了

ToClose

的帖子

The old power loop into ground slam... been there :D

2025年3月13日 12:23

评论了

jfpoulin

的帖子

best i can do atm is a picture, i wedge the screwdriver just under the lip, then slowly rotate it left or right and the blade levers up the prop enough for me to wiggle it off or get the prop remover under it.

2025年3月13日 12:19

评论了

jfpoulin

的帖子

i use a small flat head screwdriver for my tinywhoops about 5-6 millimetres across, wedge it between the blades stem and the motor bell and just carefully twist it to lever up the prop.
Works wonders to get it lifted enough that the old grab and wiggle method works after.

2025年3月4日 12:22

评论了

Therealduck

的帖子

these comments are kinda interesting, i just logged a ticket with betaFPV for about a 70% failure rate on all my LAVA 1s 300s and 450s, as well as all of my 2S 450s, maybe 30/40sec of flight time across 3 whoops.
all less than 3 months old, with maybe 20 cycles and always returned to storage within 24 hours
8 dead of 12 450mah
7 dead of 10 300mah
7 dead of 10 450mah 2s

Where as my Tattus which are older still rip at 100% 3-4 minutes of hard flight time on almost all of them.

2025年2月28日 06:56

评论了

Therealduck

的帖子

I run these these on my Air65R https://risingsunfpv.com.au/products/gemfan-1219-3-31mm-3-blade-whoop-propeller-1mm-shaft-set-of-8?variant=31453409280049
cheap and surprisingly durable.

2025年2月15日 02:43

评论了

plsdontcrash

的故障排查问题：How to keep antenna connector on Mobula 8 stuck in??

I use a couple different general solution, as previously suggested some E6000 does the trick, but i also run a TPU 3D printed canopy that has a small overhang to hold it down on my 65mm (i crash this one the most)

2025年2月15日 01:12

赞同了

Lyghtz

在故障排查问题下的回复：What nuts am I supposed to use?

Yeah I requested an refund, and about the thightening never hurts to mention it. But I made sure that they were locked thought as far as they go acoroding to they’re specifications using an electric plier wich measures who much force something is thightend

2025年2月13日 09:16

评论了

uavfutures

的帖子

Just bought into Walksnail with analogue module, so no DJI for me.
Seen a couple reviews talking about voltage sag and brownouts at as high as 3.5-7v which is crazy worrying for 1S.

on the other hand i've had a lightning 2 in my cart for about 2 months waiting on funds... so throwing my name in for that for sure :D

2025年1月19日 02:11

发布了一篇帖子

After a few failed prints and changes to the original design from this https://www.printables.com/model/685363-walksnail-goggles-x-hdzero-and-steadyview-x-led-co/files

I'm much happier with the module setup this way for Analogue on my Goggles X

Before vs after.

Printed in PETG, with minimal support on an P1S.

Will redo the print when i get a matching grey/black filament.

2025年1月14日 08:32

发布了一篇帖子

If anyone is interested and in the Brisbane/North Brisbane area i am selling a couple FPV related items.

https://www.facebook.com/marketplace/item/2433843013619395/ Little Air 75 kit i learnt to fly on

and a set of pretty much brand new Goggles L https://www.facebook.com/marketplace/item/8397667823666710/

I had to upgrade to the goggles X for the eye adjustments, and i now have a meteor85 WS and an Air65R, so don't need the 75MM anymore.

DM me here or through facebook either way works, i'd rather sell local than deal with postage and shipping issues, sorry

2025年1月8日 22:47

评论了

Fruchti

的帖子

I bought the L myself (after watching the UAVfutures Vid), and they are a great cheap digital entry into WS and if you don't need the extra features highly recommend them.

but i didn't realise until after they arrived that my vision is blurry at 5-8cm in front of my face so i couldn't use them.

Goggles L: Cons
No adjustability for correcting vision issues/glasses. (actually looks like they sell adjustable lense inserts that might help some people https://caddxfpv.com/products/lens-customization-for-goggles-l?srsltid=AfmBOopsOdqS4GhUqSFXR2_UT4LMIAi5_WcfBsL20uW2hKwslc_AfL0T)
No HDMI or Analogue module support
No upgradeability for Antennas/specs (without manually modifying following dodgy youtube vids)
No Low latency mode (not an issue for most people)

Because i needed/wanted 3 of the above 4 things i ended up forking out for the X after only 2 weeks :(

2025年1月8日 03:28

发布了一篇帖子

3rd flight in on my new Meteor85 WS, and i had a mini heart attack thinking i'd lost it in a pine tree.

https://www.youtube.com/watch?v=Qbvr4d33gvM

Sorry for the potato quality midway, i forgot all my settings for goggles were set for my GoFilm20 and i never updated for the new quad.

2025年1月7日 23:20

评论了

Gazbfpv

的帖子

I haven't ordered them yet, but the FatStrap brand have 3 different clip sizes and they claim they work with the goggles X and L and have a battery holder, with some decent designs if your into it.

DNRAU

早鸟