81sem. (modifié 81sem.)
How to Remove a Stubborn Crooked Prop on My FPV Drone?
Ok so the prop is crooked, newbie question... to remove it I just have to wank it ou?? its very very resistant I'm afraid its going to break. Suggestions? Tweazer? Finger? Dynamite?
(I was wondering why so much vibration in the last 2 flights) :)
81sem.
If you hold the motor from below, you can just wiggle and pull it off. If you have some hooked tweezers, you can also clip just below the prop and lift up, but wiggling and pulling has always worked for me.
Répondre
81sem.
Auteur
Thanks I'll wiggle it out! :)
Répondre
81sem.
lol that's the way! Just keep the motor secure from the bottom and then wiggle from the top. That is the technical term after all.
Répondre
81sem.
Auteur
Fuck its hard
Répondre
81sem.
i hold the motor with my finger and then use pliers to pull and twist the prop off
Répondre
81sem.
Auteur
Show me what you mean by pliers please? How big? what type
Répondre
81sem.
Needlenose or I have used snips before
Répondre
81sem.
Easiest method I've found to remove tiny whoop props: Hold motor with fingertips from below so that it doesn't rotate. Take other hand and spin the problem prop in one direction (vs wiggling) while applying upward pressure. Treat it like a screw w/o threads.
Répondre
A
Laisser un commentaire