S
Squid509
Última visita: 3 oct, 19:38
Seguidores
3Siguiendo
3Votos positivos
0Publicaciones
0Aún no hay biografía...
Feed de actividad
3 de octubre de 2026 a las 19:38
Ha comentado la publicación de
there are a few plans out there for PVC and PEX gates, there area some premade pop upgats gemfan makes them, kids socker popgates can be a but small for a 3in by can get them cheep on amazon
30 de septiembre de 2026 a las 20:47
Ha comentado la publicación de
not exactly. if you see a pad labeled 4v5 or 4.5v it gets powered from either the 5v BEC or the USB some manufactures will still labile it 5v. there is a diode preventing the USB from powering all the 5v items and when powering from the battery that diode eats 0.5v
28 de septiembre de 2026 a las 17:46
Ha comentado la publicación de
i did get a prusa 3dprinter back in 2019, its going to take a wile not 3 weeks though. it could be a holdup in customs due to paper work or tariff payments. if you do owe a tariff FedEX/DHL or whoever the shipping companies is will send you an email on how much you owe and a link to make the payment. it will stay stuck at customs in its payed or it there for too long and destroyed
25 de septiembre de 2026 a las 2:03
Ha comentado la publicación de
Speedybee F405 V2 40A - if you mean the AIO ok, that frame dose not have the holes for a 30x30 stack double check that before your buy
the GPS if you only want speed in the OSD skip it you don't need that, get the GPS if you want the other benefits like RTH, and GPS telemetry to help find a lost drone.
Vifly Finder 2 buzzer module - get the vifly finder mini for a 3in or something like this https://a.co/d/07BP4KG1 for size and weight on a 3in
props those are ok you may want to sample a few different ones to see witch ones you like better, prop advice for new guys alway buy more props props are cheep, props are the first thing to go in a crash
12 de septiembre de 2026 a las 21:39
Ha comentado la publicación de
for your question about the battery voltage (3S/4S) its not a question about the frame the frame dose not matter. its the props, motors, and battery voltage that have to match up.
its the motor Kv and batt voltage together matching the prop diameter to get the prop tip speeds to fall in ideal ranges. if you post the motor and prop specs i can take a look
12 de septiembre de 2026 a las 16:56
Ha comentado la publicación de
https://www.youtube.com/watch?v=fryvna-IPUM
here is walksnail goggle X, avatar pro VTX the 2 antenna one, stock antenna, ignore the RSSI alarm i had the setpoint set to high and get false alarms
12 de septiembre de 2026 a las 16:50
Ha comentado la publicación de
if its just between the walksnail goggles L or X, get the X if you can,
what kind or range are we talking about?
the absolute max rage comes from the high watt "industry" grade analog VTX just due to there increased output power due not there are FCC rules about transmitting at higher powers levels.
9 de septiembre de 2026 a las 17:15
Ha comentado la publicación de
for analog and HDzero systems, the drone only transmits and the goggles/receiver only lessens. you can have any number of ppl watching you video feed of on analog or HDzero drone with no ill effects. as long as you not doing something you don't what other people to see. you can very easily watch your buddy fly you just need to know or scan the channels until you find the one he is using
digital systems like DJI, walksnail, P1, transmit data packets from the drone to the goggles/VTX and the goggles need to talk to the drone to say i revived the packet send the next one. this is what make sharing the live feed a PITA, since you cant pair more then one goggle/receiver at a time. you can still share the live feed its still a PITA the easiest way would be to use the HDMI out from the goggles to a portable monitor. this is what i do with my walksnail goggles x. some goggles do have a wifi stream from the goggles i recommend avoiding this the video is very laggy, unreliable, short range connection and its adding RF interference
3 de septiembre de 2026 a las 2:43
Ha comentado la publicación de
first 5in. congrats!
the first the you need to be aware of is how much power it has
your most likely use to hovering at like 35-40% trottle
the 5in hover around 15-20% throttle
ease it to it go slow until you get use to the power a little too much throttle and zoom its at 100ft.
for reference my 3in need 60% for a about a hole second to catch it self in a power loop, my 5in its a quick little bump. the whole power loop takes like 3-4 seconds that last bit to trying to fight gravity and catch it drone before smacking the ground is going to feel like and eternity when first learning power loops
two vids for refence 1st one is of a 3in, 2nd one is 5in, throttle% is top left on OSD just under batt volts
+ 1 more video
1 de septiembre de 2026 a las 19:58
Ha comentado la publicación de
cant go wrong with a radio master pocket for a solid, inexpensive, entry level radio that will work with other drones as you grow. note it dose not come with batterys. make sure you order a pair of 18650s form a reputable source.
if you want to skip the pocket and get a radio you wont out grow i recommend the radiomaster GX12,TX15,boxer, GX15 too new for me to recommend ATM, the only difference that really maters is there ergonomics hand feel and button placement. buy ounce cry ounce
1 de septiembre de 2026 a las 1:58
Ha comentado la publicación de
the issue with the aspect rato is analog video is 4:3, if the goggles are also have a 4:3 screen perfect match if the goggles have a 16:9 screen then you either get black bars to cover the unused pixels or the image is stretch/warped to fit the screen line watching old TV shows or movies. a good goggle will let you chouse the bars or stretch to fit. not really an issue some may make it a bigger deal that it is
30 de agosto de 2026 a las 20:10
Ha comentado la publicación de
I'm seeing listing around the high end of your price point in the US even a amazon listing. around you low end from the chines sites
30 de agosto de 2026 a las 0:14
Ha comentado la publicación de
i would first do a visual inspection of the wires, before swapping wires
look the O4 plug and the FC socket your going to have to goggle the wiring guide for your FC. look at the colors of wires and make sure they go to the correct place, most follow the DJI pin order on the 6pin plug but not all of them do. A UART (Universal Asynchronous Receiver-Transmitter) uses 2 wires for data transmission one pin/pad will be TX and this one only talks, the other RX only listen so the TX need to be wired to a RX is part is quite opposite to all the other pads on a FC. if these wires are crossed your FC can not talk to your VTX and you will not get a OSD.
i dont not know what exactly is wrong with your drone i need more info i would need it in fount of me
i do know the 2 most common cause of no OSD is incorrect wiring and betalight settings
29 de agosto de 2026 a las 20:13
Ha comentado la publicación de
you camera is obviously not broken.
you have a betaflght setting issue or incorrect waring to your VTX
the way HD digital dose the OSD is the FC talks to the VTX and then the VTX draws the OSD your FC and VTX are not talking to each other
the common wiring mistake is the TX and RX wires are crossed, to should be TX -> RX and RX->TX. if your using the plugs you still need to double check it not every FC manufacture orders the pins the same way. DJI plugs have 6 wires if your are not using a DJI controller you can exclude the SBUS and the closest ground wire to the SBUS.
in betafligh you need to configure betafligt to use digital OSD its not setup that way buy default the easiest way is to use a preset JB talks about in this video
if you dont want to use a preset or its not available yet you need to use a few lines in the CLI instruction on what to type in are in the VTX manual sec 4.6 (page 18 and 19)
28 de agosto de 2026 a las 22:26
Ha comentado la publicación de
the value of your money is subjective i cant answer that question for you. you need to judge that for your self. im have a more of a buy ounce cry ounce view of these things
as for kits like that the good: it has every thing you need to get in the air for $110 your not going to find anything in that price with everything you need to get in the air starting off with absolutely no gear
the bad: most or all of that kit is a dead end. meaning when you want to expand your going to have to replace everything. the goggles maybe will work with other analog drones i cant be 100% sure about that since the manufacture does not list any specks or even the manuals. when you crash and brake the drone, its not a if you crash and brake it its when ask any one here its going to happen eventually. finding the parts to fix it is going to be very difficult.
my recommendation for some one starting out with no gear or experience is to buy a radio and learn to fly in a sim. this will limit your finical loss if you decide this is not for you, and most important its waaaaay cheaper to crash in the sim. your going to be crashing a lot as your learn to fly.
radio recommendation is the radio master pocket very solid, reliable, will work with your next drones as you grow as a pilot, inexpensive, not the nicest radio though, if you want to skip the pocket and save up a little and get a radio that will last you forever get a GX12,TX15, boxer if you can get one cheep. the GX15 is OK IMHO but too new for me to recommend. the only difference for the big boy radio that really matters is the ergonomics, hand feel and there is not right or wrong one if that is the one you like
27 de agosto de 2026 a las 17:09
Ha comentado la publicación de
27 de agosto de 2026 a las 17:08
Ha comentado la publicación de
27 de agosto de 2026 a las 17:02
Ha comentado la publicación de
@onlythedronie that box dose not look right, i can under stand a box to contain a fire. this product it setting off a lot of red flags, its not listed in speedy bee website, goggle search only returns sale linting's no manuals or specks, what dose it need all that circuits in it what it all that doing? why dose in need USB power? dose it have to be plugged in 24/7 for fire protection?
26 de agosto de 2026 a las 20:21
Ha comentado la publicación de
most any would work unless you have oddly specific requirements.
26 de agosto de 2026 a las 1:37
Ha comentado la publicación de
using an old CRT to display analog video?