Thinking of Building an FC and ESC: My FPV Journey
Me thinking: "Well if I m building an FC I could do an ESC too... "
....a few days later 🤣🤣🤣🤣🤣🤣🤣
🤣 1
👍 1
🔥 1
5sem
Going right for the 4in1! Single ESC? pfffft Next up AIO?
🤣 1
Responder
5sem
Autor
Nah, not interested in AIO's (at least not right now 😂)
while my FC could connect to a standard 4in1 ESC with a modified cable harness its nicer to have an 4in1 ESC which already has the same connector. The main issue right now is placing all components on a "tiny" pcb and later on finding a way to connect/route them properly. the real test comes when I m building it IRL. Because if it works then it will most likely be noisy as f...
soldering will definitely be a fun challange for both boards..
while my FC could connect to a standard 4in1 ESC with a modified cable harness its nicer to have an 4in1 ESC which already has the same connector. The main issue right now is placing all components on a "tiny" pcb and later on finding a way to connect/route them properly. the real test comes when I m building it IRL. Because if it works then it will most likely be noisy as f...
soldering will definitely be a fun challange for both boards..
Responder
5sem
@M4R5_FPV Let us know what you learn from the soldering when you get there! I feel like there's gonna be some tasty knowledge nuggets haha
👍 1
Responder
5sem
Autor
I most likely will try to utilize a stencil to apply solder paste and then use a hotplate/heat gun after placing the components to solder everything on it.
Responder
A
Deja un comentario