Which ELRS Receiver Fits GEPRC Skip 3 Aesthetically?
What ELRS receiver would be appropriate to add to my GEPRC Skip 3? It uses this flight controller: https://geprc.com/product/gep-12a-f4-flight-controller-12a-esc/
I see a few options that have diversity and that sounds pretty cool. My main concern is aesthetics. The Skip has 2 tubes sticking upward where I had previously routed my FrSky antennae. The ELRS receivers seem to have crossbars at the top of their antennae and I don't see how that would fit with this frame. Do I need to zip-tie those to the frame?
What do you think? Thanks for your help.
89 t.
You could use 2 dipole whip antennas! If you only want the two antennas, get the cheapest diversity rx you can find. Diversity will get you really good range, especially for whatever you're running on 12a.
👍 1
Odpowiedz
89 t.
Autor
@LouisXVIII So something like this and then attach whip antennas? https://geprc.com/product/geprc-elrs-dual-2-4g-diversity-receiver/
Diversity aside, how much worse are those tiny ceramic block antennas. I like the idea of keeping antennas away from props.
Odpowiedz
89 t.
Autor
Or maybe this is the most efficient route since it's available with built-in ELRS: https://geprc.com/product/geprc-taker-f411-8bit-12a-aio/
Odpowiedz
89 t.
@BlueRondo yeah that might be easier xD. But I assumed you already had it
Odpowiedz
89 t.
Autor
@LouisXVIII I have its predecessor (which has no receiver and is out of production)
Odpowiedz
89 t.
Yeah, exactly.
The ep1 recievers with the ceramic antennas are acceptable. I'm not sure what kind of build you're doing, but if its a 2s ripper you're fine. I've used one for a 5" before.
The ep1 recievers with the ceramic antennas are acceptable. I'm not sure what kind of build you're doing, but if its a 2s ripper you're fine. I've used one for a 5" before.
Odpowiedz
A
Dodaj komentarz