53 t. (zaktualizowano 53 t.)
Recommended Charger: HTRC T240 DUO for FPV Batteries
For the person that ask for my favorite charger in the live tonight (Montreal time) here is:
HTRC HTRC T240 DUO AC 150W DC 240W 10A Touch Screen Dual Channel Battery Balance Charger Discharger (It's very stupid proof)
I had to add pieces for IS batteries... and a cable (Second image)
You can see here in the catalog (https://www.diyfpv.com/catalog/htrc-t240-duo-multi-charger-discharger-for-lipo-lihv-life-lilon-nicd-nimh-pb-battery)
https://rotorvillage.ca/vifly-1s-series-charging-board-bt2-0/
👍 3
❤️ 2
53 t.
Which store did you order yours from?
Odpowiedz
53 t.
Autor
I tought it was from Amazon in Canada but I cant find the order.... all the other connecters were bought on Amazon except this one.. if I find de bill or other info I'll tell you :/
Odpowiedz
53 t. (zaktualizowano 53 t.)
I got into the hobby on a budget, built my first 5-inch with analog video, then eventually transitioned to DJI. After a while, I built a 3-inch rig just for traveling.
I used to have a SkyRC Q200, but it eventually died. I also had the SkyRC B6 neo https://www.diyfpv.com/catalog/skyrc-b6-neo-200w-10a-1-6s-dc-smart-charger-xt60, and honestly, it’s still one of my favorite chargers. It’s small, light, inexpensive, and even has a USB-C input. I don’t need to charge super fast or multiple batteries at once, so it checks all the boxes for me.
For anyone just getting into FPV, I’d argue the B6 neo is one of the best (if not the best) chargers to start with:
* Good quality & reliable
* Simple interface & easy to use
* Very affordable
The only downside: if you unplug the input power but leave the balance cable connected, it will drain the battery completely (RIP my poor Tattu R-Line 4S 150C).
👍 2
😆 1
Odpowiedz
53 t.
Autor
Wow thanks!
Odpowiedz
A
Dodaj komentarz