How to Mount an O3 Camera on TBS Source One V5 Frame
Hi there..
So I have the tbs source one v5, and I want to put an O3 on it.
The problem is that the camera cage doesn't fit the camera, I can print one and get it to fit, but the standoffs are going to limit the FOV.
Another choice is to mount it on top, on a 3d printable gopro mount I found online taht is meant for the o3, but i don't know
The third option is to remove the plates and the standoffs and print a big camera cage to hold the O3, like that one on the It's FPV era frame, but that one wasn't printed, it is made from nylon.
I want to hear from you guys...
Thanks
8 t.
well if you got someone who can cut cf there is a mod on thingiverse for the o3
https://www.thingiverse.com/thing:5730548 where the top and bottom plate got modified to fit it.
Or you could design yourself a cage like this one
https://www.aerial-pixel.com/dronepilots/#!/TBS-Source-One-V5-DJI-O3-Conversion-TPU-Set-Choose-From-10-Different-Colors/p/682141286
https://www.thingiverse.com/thing:5730548 where the top and bottom plate got modified to fit it.
Or you could design yourself a cage like this one
https://www.aerial-pixel.com/dronepilots/#!/TBS-Source-One-V5-DJI-O3-Conversion-TPU-Set-Choose-From-10-Different-Colors/p/682141286
Odpowiedz
W
8 t.
Autor
Thanks!
Odpowiedz
A
Dodaj komentarz