Air65 Overheating Issues: Is Indoor Flying the Cause?
Has anyone ever had any problems with the air65 overheating? I fly it inside and I think my osd disappearing and black screen of death is due to it overheating. Not getting enough air when flying indoors? Should I give it a break after each battery too?
79 t.
I don't think it's an issue of over flying. Every Saturday and Sunday, I would fly 6 packs while 6 packs were charging, over and over. I did blow out a motor that way, but no vtx issues.
What is the vtx power set to? If you have it 100-200 and the ufl is loose, it will degrade the battery and flight time, as well as overheat the battery, but again, not certain on the vtx.
That was a lot of words to say nothing. Good luck, pilot!
Odpowiedz
79 t.
Autor
Okay so if it’s not the heat that helps. I plugged it into the wall and when I moved wires it would do that so it may be the connection between the camera and the board. I couldn’t tell if it was the antenna or the black yellow and red cord to the camera. I think it’s the cord but I don’t know how to tell. If it is the black yellow and red cord can I but it without buying a whole new camera? Also my air65 came with a 5 in one board.
Odpowiedz
79 t.
what are the battery volts when this lands? could the battery be out of charge?
Odpowiedz
79 t.
Autor
I run it till it says land now. So normaly push it to like 3.4 or 5 so I can get like three minutes. I use tattu 300mah batteries. When I put a new battery in I also had that problem. Also I new to the hobby and love your videos. I bought the air65 and many other things to start. I wanted to go originally with the Ymzfpv lighting v2 but I realized tinywhoop would be a good start but now I and having some trouble. Really frustrated but I saved up so much money to do this I’m going to try my darn hardest to get it fixed. I am completely out of money so I hope it something cheap so I can get flying soon.
Odpowiedz
A
Dodaj komentarz