Motors Not Working After FPV Build - Need Troubleshooting Help
Hmm to this point it's a fail and I dont know, i'll give it a second try tomorrow probably. Everything seem to be working except the motors. The camera is working though the OCD is not showing what I configured. I tried everything in Betaflight but the engine won't work.. The 04 is working but not the motors ... discouraging a little from this point i'll see what are my options. Might be my soldering .. :( I would have been surprised it would work the first time off
🥲 1
38 W
what do the motors do in the motors tab of betaflight
Antworten
38 W
Autor
Nothing :(
Antworten
38 W
@jfpoulin just trouble shooting here, plug in the battery (make sure its not flat) go to the motors tab, disable the saftey box, understand the risks thinggy, and slide the motor tabs up. It should spin up each motor
Antworten
38 W
Autor
No, I tried that already :(
Antworten
C
38 W
What is that frame? I'd be intrested in building a Walksnail version of that drone.
Antworten
38 W
Autor
THis one! https://www.tunerc.com/product/3inch-o4-pro-toothpick-bundle-elrs-rx/
Support is helping me right now so I can say they are present!
🔥 1
Antworten
38 W
38 W
Hope it works out for you. Keep us posted. Good luck.👍
Antworten
38 W
Maybe you could try to adjust the start up power through esc configurator.
Antworten
A
Kommentar hinterlassen