MrZombieJ

UP-S6 employs the circuit that features 6 totally independent but identical power outputs which are powered 4.35W each. It's designed for charging single cell Lipo and LiHV. Insert the battery lead to the right connect in each port, the charger can charge 6 batteries at the same time. The charging current can be adjustable from 0.1-1.0A and also support 5V, 2.1A USB charging. The charging status can be displayed in digital segment LED indicators. Features: Six independent ports can be used at the same time Three different kinds of battery connectors in each port Six independent charging circuits LED and audible sound indicate charging status Adjustable charging current from 0.1-1.0A USB port (5V/2.1A) for charging iPad, mobile phones, digital cameras, etc. Maximum protection: battery reverse polarity protection, battery over voltage protection and DC input voltage protection Specifications: Item name: Ultra Power UP-S6 6 channels intelligent fast charger DC input voltage: 9.0V-15.0V Charge power: Max. 4.35W x6, ±10% Charge current: (0.1-1.0A) x6, ±10% Battery type: LiPo/LiHV Battery cell count: 1cell Indication: LED light Support battery port: Micro, MX, mCPX Support USB charge port: 5V/2.1A Product weight: About 66g Dimension: About 100 * 50 * 22mm

Needs cord or converter.

TurboBee 77R Micro FPV Race Whoop: - Frame Wheelbase: 77mm - Bottom plate thickness: 1.5mm - Top board thickness: 1mm - Flight control pitch: 16x16mm 20x20mm - Fpv cam spacing: 19mm - Top and bottom plate spacing: 22mm (aluminum column height - Build Weight: 55g - SucceX Micro 16x16 Tower 2-3S - iFlight 1103 motors (1.5mm shaft) - Caddx.us Turbo Eos2 Camera - Gemfan 1635 40mm 3 blades 1.5mm shaft propeller - iFlight Prop Guards 40mm SucceX Mirco F4 Flight Tower System 16x16mm SucceX F4 Flight Controller -STM32F411 -Input voltage 2-4S LIPO -Gyro: MPU6000 -2x UART ports -4x motor outputs -OSD inbuilt -No Blackbox FLASH -BEC 5V 2A Cont. -Size: 21mm*21mm -Mounting holes: 16*16 -Weight: 2.5g -BF target: MATEKF411 SucceX Mirco 12A Brushless ESC -Firmware: BlheliS -Input voltage : 2-3S LIPO -Continuous current: 12A -MCU: BB21F16G -BEC: None -ESC protocol: PWM, oneshot125, multishot, dshot150, 300, 600, etc. -Size: 23mm*21mm -Mounting hole 16*16mm -Weight: 2.7g SucceX Mirco VTX-Power: PIT/25/100/200mW -Antenna interface: IPEX (UFL) -Telemetry: IRC Tramp -Size: 17mm*27mm -Mounting holes: 16*16mm -Weight: 1.6g

Specifications: FrSky D8 Receiver Runcam Nano3 Camera 25mw VTX 5A Blheli_S ESC 65mm Length 1S LiPo Batteries

Up to 1 Watt power output Packet rates up to 200Hz Optimized circuitry for ultra-low power consumption Built-in TCXO oscillator Low noise, high comfort High contrast OLED display Rugged gunmetal CNC housing Awesome RGB light effects High efficiency cooling system Wifi and Bluetooth support Built-in ExpressLRS backpack Built in accelerometer Directional nav key and customizable shortcut buttons Micro and Nano adapters included 915/868MHz Moxon Antenna and T Antenna included Futaba CRSF Cable included UART Cable included Specifications Item: Bandit ExpressLRS RF Module Regulatory Domain: FCC915 MCU: ESP32(main), ESP8285(aux, as ESP backpack) RF Chip: SEMTECH SX1276 Refresh Rate Min/Max: 25Hz/200Hz RF Output Power: 1000mW/30dBm Module Bay Adapters: Micro standard 5pin socket & Nano standard 8pin socket Built-in RGB lights Built-in OLED screen G-sensor Support: Yes XT30 Power Supply Voltage: DC 6V ~ 16.8V Weight: 155 grams (with antenna） Dimension: 90*51*24mm Brand new, sealed in packaging.

Pre-tuned with smooth cinematic settings 1200TVL 2.1mm 160° Camera 24.5 grams (without battery) Motors: XING 0803 17000KV FPV Micro Motor AIO: BLITZ F411 1S 5A AIO Whoop Board Flight time: 3-4 min cruising (1S 300mAh) Camera: 1200TVL 2.1mm 160° Camera Weight: 24.5g (without battery) Propellers: HQProp 31mm FC Pattern: 25.5x25.5mm Propeller Size: 31mm Body size: 46x46mm Wheelbase: 65mm Antenna: Whip

FRAME: YMZFPV E1F

FC: F722-40A FC & ESC

ESC: 2-6S 40A ESC

VTX: O3 Air Unit

MOTOR: RCINPOWER 1204-5000KV Motor

CAMERA: O3 Camera

PROP: Gemfan 2023-3

WHEELBASE: 100mm DIMENSION: 121 x 99 x 58 mm

WEIGHT: 123g

No reciever contained in this drone.

Product name: Huma20

Frame： Huma20 Frame

Wheelbase：95mm Bottom plate: 2mm

Upper plate：2mm

Arm thickness:2mm

FC：Sub250 Redfox A3 45A AIO

ESC：Sub250 Redfox A3 45A AIO

MCU： STM32F722RET6 Gyro: ICM42688-P

OSD： AT7456E

VTX：O3 Air Unit Camera： O3 camera

Antenna：5.8G&2.4G

Motor：Sub250 1304/6000kv

Propellers: HQ 2*2.2*4

Weight: 140g±5（no battery）

Receiver： ELRS2.4

Recommend battery：650mah-750mah Connector: XT30

Model: Gofilm 20 FC: CADDXF4_AIO_ELRS VTX: Moonlight Kit Wheelbase: 94mm Motor: 1303 6000KV Propeller: HQprop T2×2×3 Weight: 115±5g Size: 133×123×39mm Flight time: 4S 650mAh & about 5.5 minutes Receiver: ELRS 2.4G Battery interface: XT30 FC MCU: STM32F405RGT6 GYRO and IMU: ICM42688 Barometer: BMP280 ExpressLRS receiver: ELRS V3.0 UART ESC: 20A 4-IN-1 Blackbox: 8MBp Support power: 2~4S Lipo/Lihv Mounting hole distance: 25.5×25.5mm Firmware target: CADDXF4_AIO_ELRS VTX Model: Moonlight Kit Firmware name: AvatarMoonlight_Sky_X.X.X Communication frequency: 5.725-5.850 GHz Transmitter power (EIRP): FCC: <30dBm; CE: <14dBm; SRRC: <20dBm; MIC: <25dBm I/O interface: JST1.0*4(power cable); JST0.8*6(USB)；microSD Card Slot; IPEX-1 Sensor: Starlight sensor FOV: Max 160° Aperture: F2.1 Shutter: Rolling shutter ISO: 100-25600 Recording resolution: 4K@30/60fps; 2.7K@30/60fps; 1080p@100/60fps; 720p@60fps Max Mbps: 150Mbps Video format: MP4 (H.264) 3D DNR: Support Gyro flow: Support Built-in EIS: Support Wide power input: 7.4V-25.2V Power consumption: [email protected], [email protected] Memory card type: U3 microSD, Max 256G Camera size: 19.6mm×19mm×24mm VTX size: 15.3mm×34.5mm×34.5mm VTX installation hole: 20×20mm/25×25mm (M2) Weight: 38.5g (antenna not inlcuded) OSD: Canvas mode Latency: Average delay 22ms Antenna: 2 (IPEX)

Key Features:

•Lightweight Design: Only 16.5g, giving you unmatched agility and speed.

•Accurate 25mW VTX – Stay within race-legal power limits without worry.

•ESC Flexibility – Supports 24kHz, 48kHz, or 96kHz PWM rates. Factory default is 48kHz for balance, but users can switch as needed. Use O-H-5 firmware to avoid damaging the ESC.

•Powerful Motors: HMB RS 0702 30000KV for high-speed racing.

•Battery Connector: A30 connector for reliable power delivery during races compatible with BT2.0.（Recommend 300mAh 1S 3.8V）

•Firmware: Betaflight 4.5 KAACK, with RPM Limit for spec racing.

Specifications EMAX TINYHAWK III RTF VTX: 200-100-25mW 37CH (Adjustable frequency) Receiver: EMAX Tiny Receiver (SPI/Frsky_D8) Maximum Size: L*W*H=105x105x45mm Camera: RunCam Nano 4 Camera FC: F4 (STM32F411 firmware) Weight (Without battery): 32g Propeller: Avia TH Propeller Motor: TH0802 II 15000KV Battery: 1S HV 450mAh Support: SmartAudio ESC: 4in1 /5A ESC Wheelbase: 76mm EMAX E8 RADIO TRANSMITTER

Brand Name: Eachine Item Name: Viswhoop 2.5 Inch 3-4S Cinewhoop Wheelbase: 130mm Size: 170mm*105mm*32mm Weight: 124g (without battery) Recommend Battery (Not Included) : 3S 650mah/750mah/850mah 4S 550mah/650mah/750mah/850mah

Features: Light 2.5 Inch Caddx Vista Cinewhoop Compatible both Frsky D8/D16 Radio transmitter and DJI FPV Radio transmitter New design 1204 High efficiency brushless motors Camera Angle adjustable Smooth and powerful Compatible both for 3s-4s Lipo/LIHV