A

AleksFPV

Ultimo accesso: 21 nov, 17:09
Follower
2
Seguiti
0
Voti positivi
0
Post
4
A teen that started flying a few years ago.

Feed attività

20 novembre 2026 alle ore 02:34

Ha commentato il post di
Saw them looks cool. I support their mission and think they will make a change in fpv for the better. Hopefuly the start of an open source era!

20 novembre 2026 alle ore 02:27

Ha commentato il post di
@AleksFPV I use lava 550mah batterys though so the heavier wheght likely puts more strain on the canopy in crashes.

20 novembre 2026 alle ore 02:26

Ha commentato il post di
@AurilFPV I find the air ii canopies to be weak but I just fix them with e6000 and they hold up everything full speed crashes into wals and more but I find they break in the four corners around the camera. Mine ime currently using is glued on every single corner of the cam.

20 novembre 2026 alle ore 02:23

Ha commentato il post di
@LachieFPV Same I also love the experience of building even though higher costs. Have built all my quads and love that I can make it into whatever I want getting to chose every single part. I also just love messing with electronics and soldering. My favorite past times.

20 novembre 2026 alle ore 02:20

Ha commentato il post di
@LachieFPV Yep most expensive system more than DJI and Walksnail

20 novembre 2026 alle ore 02:19

Ha commentato il post di
My grain of salt is that analog is underrated. Buy a air 75 or 65 and fly for yourself. Flying for yourself and not someone will make you enjoy the hobby much more so just fly to have fun. Btw when your flying analog you wont realy notice that its "bad quality video" unless your flying realy far. Im assuming your just starting so I recomend air 65 freestyle for indoor flying and air 75 for outdoor. Both can be used for either but chose trhe drone for where you will fly most. If you want to build whoop from scratch with analog or a digital system I am willing to help you select what parts are right for you. Just quad under 300 you can do but with goggles and radio no chanse.

15 novembre 2026 alle ore 14:48

Ha commentato il post di
@AleksFPV Take this with a grain of salt tho as charging at 2c is more dangerous and always watch your batterys when charging and charge in a safe place!

15 novembre 2026 alle ore 14:46

Ha commentato il post di
@AurilFPV I always charge at 2c for a year and have only had to retire 1 whoop battery because of a crash causing it to hit a rock making it puffy, luckily no explosions.

15 novembre 2026 alle ore 01:36

Ha commentato il post di
dont live anywhere near

13 novembre 2026 alle ore 22:06

Ha commentato il post di
Get a vifly whoopstor its like 20$-40$ and alows you to charge to storage voltage extending battery life.

9 novembre 2026 alle ore 16:52

Ha commentato il post di
I’m doing racegow this year and it’s great fun even though I’ve never raced drones before and am by far not the best. Still great fun and has already improved my flying.

2 novembre 2026 alle ore 15:04

Ha commentato il post di
Bend and send

27 ottobre 2026 alle ore 20:19

Ha commentato il post di
Just a thing to prevent whoop setup accidents as betaflights default is set up for most 5" drone motors.

27 ottobre 2026 alle ore 20:18

Ha commentato il post di
Also when doing betaflight setup In make sure in the motor tabs it has the corect amount of motor magnets or the mottor will stutter may fly but can easily burn the motor and esc.

27 ottobre 2026 alle ore 20:17

Ha commentato il post di
In beta flight make sure in the motor tabs it has the corect amount of motor magnets i have had this stuttering problem before and this fixed it.

25 ottobre 2026 alle ore 23:33

Ha commentato il post di
If this is the stack it is not compatible with osd you could just plug vtx and cam to power then connect their comunicating wires to get video but no osd.

25 ottobre 2026 alle ore 23:30

Ha commentato il post di
@SiO2 This is a differnt stack as he has the hd version witch im assuming isnt on the builder. And this wont be cross compatible as no analog osd chip will be present on his.

25 ottobre 2026 alle ore 23:28

Ha commentato il post di
This is and HD fc so you will not have osd and you just directly solder the cam to the vtx and just solder gnd and pwr to the fc on the vtx because its and hd vtx it will not have an analog osd chip so cant do to much with this combo dont recomend this set up too much as you wont have any telem in the goggles such as bat voltage quite important stats you need to fly so I would go out and buy an analog fc. Anyone corect me if im wrong btw.

25 ottobre 2026 alle ore 23:24

Ha commentato il post di
Time for the 20" x8 and the 20000$ red comodo am I right.

25 ottobre 2026 alle ore 23:23

Ha commentato il post di
I think a crux frame is basicly what your looking for.

Prendiamo il volo insieme e portiamo il mondo dei droni FPV a nuove altezze.

© 2026 DIYFPV. Tutti i diritti riservati.