Zdjęcie w tle użytkownika
Zdjęcie użytkownika

Mattylite

Ostatnio widziano: 12 paź, 20:00
Obserwujący
3
Obserwowani
7
Głosy za
17
Wpisy
1
I live in Seattle and have been flying FPV drones since 2020. Looking forward to meeting some new friends with the same hobby!

Kanał aktywności

12 września 2026 08:37

Opublikowano post

hey there.

I currently have HDZero goggles, but I’m looking for something with significantly better range, penetration, and video quality. I’m really torn between the Walksnail Goggles L, Goggles X, and DJI Goggles 3.

My main priority is maximum range. But I will be using it for my regular 2-5” quads as well so I want it to be durable as well.

1 stycznia 2025 23:36

Polubiono komentarz użytkownika pod pytaniem w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

I dont have that transmitter, but i would plug it in to betaflight, go to receiver tab, and check what the inputs are doing. If you can recalibrate the gimbals on that transmitter i would do that too

1 stycznia 2025 23:36

Polubiono komentarz użytkownika pod pytaniem w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

Recalibrate Transmitter.

1 stycznia 2025 23:36

Polubiono komentarz użytkownika pod pytaniem w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

Did you try to recalibrate?

https://www.youtube.com/watch?v=ri2sU7dd0II


Not sure on the EMAX E8 but on Pocket radio I can manually change outputs for sticks MIN / MAX.

1 stycznia 2025 23:36

Polubiono komentarz użytkownika pod pytaniem w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

Run through the calibration process on the radio. If that does not work, set the "Stick Low Threshold" a bit higher. It can be found in the Receiver tab in Betaflight Configurator

Zdjęcie opublikowane przez użytkownika

1 stycznia 2025 23:36

Polubiono odpowiedź użytkownika na pytanie w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

good idea. Always nice to have a betaflight dev ready to help out😁

1 stycznia 2025 23:33

Odpowiedziano na komentarz użytkownika pod pytaniem w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

Ok I’m going to try that and I will let you know here in a minute if that worked.

thank you for your quick responses.

1 stycznia 2025 21:53

Polubiono pytanie użytkownika w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

1 stycznia 2025 21:53

Zadano pytanie w dziale Rozwiązywanie problemów: Mobula 6 is difficult to arm unless I press throttle down very hard.

Mobula 6 is difficult to arm unless I press throttle down very hard.

I have a newly set up tinywhoop and it will not arm unless I press the throttle all the way down really hard.

what can I do to make it so it will arm without putting so much pressure on the throttle stick?

Also, sometimes I can’t even get it to arm and it will only move when I move the yaw and pitch joystick.

my gear:

-Mobula 6 AIO5 HDzero freestyle

-Emax Transporter 2 plus with ELRS

-Emax E8 transmitter


I have attached a video to show the problem.


https://youtube.com/shorts/SVBcHw6q9Q0?si=mTrMXwYpkxJuPoa4

15

Wzbijmy się razem w powietrze i przenieśmy świat dronów FPV na nowy poziom.

Katalog
Pomoc i informacje prawne
© 2026 DIYFPV. Wszelkie prawa zastrzeżone.