Omslagfoto van de gebruiker
Gebruikersfoto

Mattylite

Laatst gezien: 12 okt, 20:00
Volgers
3
Volgend
7
Upvotes
17
Berichten
1
I live in Seattle and have been flying FPV drones since 2020. Looking forward to meeting some new friends with the same hobby!

Activiteitenfeed

12 september 2026 om 08:37

Heeft een bericht geplaatst

hey there.

I currently have HDZero goggles, but I’m looking for something with significantly better range, penetration, and video quality. I’m really torn between the Walksnail Goggles L, Goggles X, and DJI Goggles 3.

My main priority is maximum range. But I will be using it for my regular 2-5” quads as well so I want it to be durable as well.

1 januari 2025 om 23:36

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

I dont have that transmitter, but i would plug it in to betaflight, go to receiver tab, and check what the inputs are doing. If you can recalibrate the gimbals on that transmitter i would do that too

1 januari 2025 om 23:36

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

Recalibrate Transmitter.

1 januari 2025 om 23:36

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

Did you try to recalibrate?

https://www.youtube.com/watch?v=ri2sU7dd0II


Not sure on the EMAX E8 but on Pocket radio I can manually change outputs for sticks MIN / MAX.

1 januari 2025 om 23:36

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

Run through the calibration process on the radio. If that does not work, set the "Stick Low Threshold" a bit higher. It can be found in the Receiver tab in Betaflight Configurator

Afbeelding geplaatst door gebruiker

1 januari 2025 om 23:36

Heeft het antwoord van op een vraag bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

good idea. Always nice to have a betaflight dev ready to help out😁

1 januari 2025 om 23:33

Heeft geantwoord op de reactie van op een vraag bij Problemen oplossen: Mobula 6 is difficult to arm unless I press throttle down very hard.

Ok I’m going to try that and I will let you know here in a minute if that worked.

thank you for your quick responses.

1 januari 2025 om 21:53

Heeft de vraag van bij Problemen oplossen een upvote gegeven: Mobula 6 is difficult to arm unless I press throttle down very hard.

1 januari 2025 om 21:53

Heeft een vraag gesteld bij Problemen oplossen: Mobula 6 is difficult to arm unless I press throttle down very hard.

Mobula 6 is difficult to arm unless I press throttle down very hard.

I have a newly set up tinywhoop and it will not arm unless I press the throttle all the way down really hard.

what can I do to make it so it will arm without putting so much pressure on the throttle stick?

Also, sometimes I can’t even get it to arm and it will only move when I move the yaw and pitch joystick.

my gear:

-Mobula 6 AIO5 HDzero freestyle

-Emax Transporter 2 plus with ELRS

-Emax E8 transmitter


I have attached a video to show the problem.


https://youtube.com/shorts/SVBcHw6q9Q0?si=mTrMXwYpkxJuPoa4

15

Laten we samen de lucht in gaan en de wereld van FPV-drones naar nieuwe hoogten tillen.

© 2026 DIYFPV. Alle rechten voorbehouden.