Upgrading BetaFPV Pavo Femto with Flywoo O4 Camera Housing

I recently picked up the BetaFPV Pavo Femto to hold an O4 Lite. From the start, I opted to not use the BetaFPV camera housing, instead opting for the Flywoo O4 Camera Housing so I can use either the Flywoo O4 ND Filters or, even better, the Flywoo O4 Wide-FOV Kit.

It's an awesome, powerful little quad but I thought the 1.6" props were a bit whiny. I picked up a Pavo Pico Frame (for the cabon and ducts). I moved the Canopy, FC, O4, and Motors to the Pavo Pico carbon and ducts. I put some 45mm props on it and I'm happy to report it flys just as well, or maybe even better with the larger props and I prefer the new sound profile. The Femto motors are, I believe, the same as what the include with the current Pavo Pico, so you can do this mod starting either from the Femto or from the newest Pico (with 1102/14000 motors)

To accept more pack sizes, I snipped the battery cage on the Pico/Femto ducts and am using a battery strap. I was originally using a Velcro One Wrap Cable Ties, which worked pretty well. I'm now using a Pyrodrone Micro Battery Strap Metal Buckle, 10mm x 115mm. To help with battery slippage, I use a wrap or two of Maxwel Wire Harness Tape.

For greater camera angles, I snipped back the top of the Femto canopy a bit. I used E-6000 to glue the O4 Antenna to the O4 Board. I used B-7000 to secure the camera's cable to the interposer board to the camera.

I'm running HQProps 45mm 3-blade props on it.

This 2S quad is a ton of fun to fly, runs jello-free, and the mods were all super easy. The attached pictures are in the Femto frame, but I do prefer it in the Pico frame.

Items being used (none are affiliate links)

* Pavo Femto - https://www.amazon.com/dp/B0DXT4BFCQ

* Pavo Pico Frame - https://www.amazon.com/dp/B0C85CLRP8

* Flywoo O4 Camera Housing - https://flywoo.net/products/flywoo-dji-o4-camera-shell-set-black-red-yellow-purple-

* Flywoo O4 ND Filters - https://flywoo.net/products/flywoo-o4-nd-filters-uv-nd4-nd8-nd16-

* Flywoo O4 Wide FOV Kit - https://flywoo.net/products/flywoo-dji-o4-ultra-wide-angle-lens-155%C2%B0%E2%80%8B%E2%80%8B

* Battery strap - https://pyrodrone.com/products/pyrodrone-12-135mm-micro-battery-strap-metal-buckle?variant=41200251338795

* Maxwel Wire Harness Tape - https://www.amazon.com/dp/B08RS5P3WZ

* HQProps 45mm 3-blade props - https://www.getfpv.com/hqprop-45mmx3-3-blade-propeller-set-of-4-1-5mm-shaft-gray.html

Test flight footage: https://www.youtube.com/watch?v=fDFPEMb5yA8