Introducing Quasit: BetaFPV Meteor75 Pro for O4 Lite
Introducing Quasit
I picked up the BetaFPV Meteor75 Pro for O4 Lite as I really wanted an 1S O4 Lite quad. Recording 4K video on a tiny little 1S that I can fly nearly anywhere without scaring people? Yes please!
I'm using HCTRM's canopy titled Meteor 75 Pro O4 TPU Canopy for Flywoo ND filter which allows me to use the Flywoo O4 Camera Housing so I can use either the Flywoo O4 ND Filters or, even better, the Flywoo O4 Wide-FOV Kit.
You can use this canopy with the standard, self-tapping FC stack screws. Or you can drill out the FC posts that exist in the duct and instead use M2 hardware (bolts and nuts). For repairability, I opted to drill it out and use the M2 hardware (12mm bolts, I believe).
I used E-6000 to glue the O4 Antenna to the O4 Board. I used B-7000 to secure the camera's cable to the interposer board to the camera.
I'm running HQProps 45mm 3-blade props on it.
Items being used (none are affiliate links)
* HCTRM's canopy - https://makerworld.com/en/models/1456874-meteor-75-pro-o4-tpu-canopy-for-flywoo-nd-filter
* Flywoo O4 Camera Housing - https://flywoo.net/products/flywoo-dji-o4-camera-shell-set-black-red-yellow-purple-
* Flywoo O4 ND Filters - https://flywoo.net/products/flywoo-o4-nd-filters-uv-nd4-nd8-nd16-
* Flywoo O4 Wide FOV Kit - https://flywoo.net/products/flywoo-dji-o4-ultra-wide-angle-lens-155%C2%B0%E2%80%8B%E2%80%8B
* HQProps 45mm 3-blade props - https://www.getfpv.com/hqprop-45mmx3-3-blade-propeller-set-of-4-1-5mm-shaft-gray.html
Sample Flight Videos
+ 1 more video
Dodaj komentarz