uavfutures
Laatst gezien: 21 okt, 01:58
Volgers
698Volgend
1Upvotes
8Berichten
52G Day. Stew here. For over a decade I have been helping people enjoy the sky through FPV and teaching FPV to hundreds of thousands of people. I started UAVFutures on Youtube to help others and now I am extremely proud to take that to the next level with DIYFPV. Happy flying everyone.
Activiteitenfeed
13 oktober 2026 om 00:06
Heeft gereageerd op het bericht van
they are all good, the one here on diyfpv is free however and will run on anything https://www.diyfpv.com/resources/fpv-drone-simulator
9 oktober 2026 om 23:42
Heeft gereageerd op het bericht van
love it
30 september 2026 om 01:34
Heeft gereageerd op het bericht van
@braxtonfpv if the same behaviour is happening in betaflight when raising the throttle for that motor then that points to a hardware fault or bad connection. Check your soldering.
one way to pinpoint the issue is to solder a different motor to that esc. If that fixes the issue, then you will know that the old motor was faulty, IF the issue is still there after swapping motors you will know the issue was the esc.
one way to pinpoint the issue is to solder a different motor to that esc. If that fixes the issue, then you will know that the old motor was faulty, IF the issue is still there after swapping motors you will know the issue was the esc.
30 september 2026 om 01:17
Heeft gereageerd op het bericht van
@braxtonfpv ok, this is an important thing to note.
What is happening in betaflight when you raise the motor tab? does it seem normal in the betaflight motor tab? if you can tell me this we can probably have a good guess at what the issue is
What is happening in betaflight when you raise the motor tab? does it seem normal in the betaflight motor tab? if you can tell me this we can probably have a good guess at what the issue is
30 september 2026 om 00:23
Heeft gereageerd op het bericht van
is this happeneing when you are spinning them up in the betaflight motor tab?
29 september 2026 om 00:51
Heeft een build gedeeld: Uavfutures Micro (My number 1 pick of any drone) lightning v2 DJI build
have you used the map feature here ? you can msg local pilots there and fly with others in your area https://www.diyfpv.com/map
28 september 2026 om 01:34
Heeft gereageerd op het bericht van
have you looked at the pilot map here on diyfpv for local pilots?
this week from like wednesday till sunday is the australian nationals. like 100 drone pilots all hanging out and racing. it is going to be amazing. https://aufpv.org.au/nationals
26 september 2026 om 03:21
Heeft de build van leuk gevonden: FlyFish Volador II - SpeedyBee V4 - Walksnail