Omslagfoto van de gebruiker
Gebruikersfoto

Zakory

DIYFPV Explorer badge
Laatst gezien: 13 mrt, 12:43
Volgers
4
Volgend
21
Upvotes
4
Berichten
4
Imagination is endless when you Freestyle the world. Have been in the RC world since 2000. Flying quads since 2020, first one was a cheap Amazon one, I wanted more and then Steve Steve showed up on suggested videos. Never looked back since. Building quads is a fantastic hobby, the community is awesome.

Activiteitenfeed

17 februari 2025 om 06:57

Heeft gereageerd op het bericht van
Crazy, luck of the draw. last prop I had come loose flew apart mid flight.

16 februari 2025 om 03:19

Heeft de vraag van bij Problemen oplossen een upvote gegeven: Mamba f405 mk3 4in1 stack motor drops when throttle up

16 februari 2025 om 00:08

Heeft gereageerd op het bericht van
It’s a Pavo 20 pro nightfire. I loaded factory software back on, motors receive the correct beeps. 

15 februari 2025 om 23:57

Heeft gereageerd op het bericht van
Where’s that located in betaflight

15 februari 2025 om 23:40

Heeft geantwoord op de reactie van op een vraag bij Problemen oplossen: Twitchy motors on arm

thanks for the info I will check that in a few. Also to update situation. The quad is a Pavo 20 pro nightfire. Motors 1,2,3 will not spin in beta flight. Motor 4 will spin

15 februari 2025 om 23:38

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Twitchy motors on arm

Probably a configuration issue. Maybe a couple of em.

First part could be needing to change min throttle/idle throttle

Second and related part could be needing to ensure you have the right info for you're motors in Betaflight. Maybe the number of poles/magnets is wrong?

Last thing I could think of is ESCs needing updated but I doubt it would be that.

14 februari 2025 om 05:50

Heeft gereageerd op het bericht van
Would definitely love to try out the new system or if I should just stick with my 03, worst case I don’t like it and I’ll gift it to the next guy. 😁

14 februari 2025 om 05:38

Heeft een vraag gesteld bij Problemen oplossen: Twitchy motors on arm

Twitchy motors on arm

when I initially arm the quad my motor don’t spool, they kinda just twitch until I raise throttle. It’s also very hard to control

1

14 februari 2025 om 05:30

Heeft een bericht geplaatst

what would cause motors to twitch when quad is first armed?

2 februari 2025 om 22:48

Heeft gereageerd op het bericht van
Have yet to fly it. Waiting on a longer camera to vtx cable to get here. Definitely will update how it flys & post video. 

2 februari 2025 om 21:38

Heeft gereageerd op het bericht van
lol that’s what I’m doing. 

2 februari 2025 om 08:11

Heeft een bericht geplaatst

Frame: GEPRC GEP-Mark4 5" Frame Kit

FC/ESC: SpeedyBee F405 V4 Stack - F4 V4 FC + 55A BLHeli_S ESC - 30x30

Receiver: DarwinFPV Cement Ultra Durable ELRS 2.4GHz

Motors: DYS Samguk Series Shu 2306 2500kv Motor

Vtx: Caddx Polar Micro Starlight Vista Kit

Props: Gemfan WinDancer 5043 3-Blade Propeller- Skitzo Galaxy

Battery: OVONIC 4s Lipo Battery 100C 1550mAh 14.8V Lipo Battery

Radio: RadioMaster Pocket Portable Remote Controller Hall Gimbal EdgeTX Built in LED Light Mode 2

Googles: Fpv Googles V2 Rooted

Afbeelding geplaatst door gebruiker

2 februari 2025 om 07:25

Heeft gereageerd op het bericht van
That’s awesome, never hurts to double check work. I have done it on multiple builds. 

1 februari 2025 om 17:34

Heeft gereageerd op het bericht van
You’re spot on with that. I have 6s love it. This is just a build I wanted to try. Never ripped a 4s 5”

1 februari 2025 om 17:26

Heeft gereageerd op het bericht van
Open CLI and make sure everything looks correct. I had to do a save, dump and reload

1 februari 2025 om 00:42

Heeft gereageerd op het bericht van
Wow

1 februari 2025 om 00:41

Heeft gereageerd op het bericht van
Keep the quad cool 

1 februari 2025 om 00:40

Heeft gereageerd op het bericht van
It’s an awesome feature. Definitely check it out

1 februari 2025 om 00:40

Heeft gereageerd op het bericht van
Nice flight

1 februari 2025 om 00:38

Heeft gereageerd op het bericht van
I’ve been sharing this everywhere, I knew it would be awesome when Steve talked about it 

Laten we samen de lucht in gaan en de wereld van FPV-drones naar nieuwe hoogten tillen.

© 2026 DIYFPV. Alle rechten voorbehouden.