Fancy_PantsFPV

Laatst gezien: 20 okt, 06:33

Volgers

Volgend

Upvotes

Berichten

I've been flying fpv drones for almost 2 years. My youtube channel name is FancyPants FPV.

Activiteitenfeed

25 september 2026 om 21:38

Heeft gereageerd op het bericht van

MARK_AT_MELB_FPV

WOW! that is some smooth flying 🔥🔥🔥

18 september 2026 om 22:55

Heeft gereageerd op het bericht van

neochip

Probably DJI... I never owned anything buy DJI, but I never liked their camera drones because they aren't as fun as FPV drones Lol. l also like Walksnail and analog more then their O4 and O3 air units.(Mainly because I;m a budget baller when It comes to drones.)

24 juni 2026 om 05:05

Heeft gereageerd op het bericht van

YorkieCanadian

My frame from aliexpress used injection molded plastic for the landing feet, gopro mount and antenna mount and all of the pieces broke. From my experience injection molded plastic is pretty weak so i don't think it will be a very durable quad.

15 juni 2026 om 22:32

Heeft gereageerd op het bericht van

TheDuke

Here's a link for 3 DarwinFPV waterproof drones. https://darwinfpv.com/collections/waterproof

5 juni 2026 om 19:30

Heeft gereageerd op het bericht van

Fancy_PantsFPV

@M4R5_FPV Yeah, it just randomly decided to work after around the tenth time lol.

5 juni 2026 om 02:14

Heeft gereageerd op het bericht van

Fancy_PantsFPV

@M4R5_FPV LETSS GOOOOOOOO. After trying a few more times it somehow worked loll. Thanks for the help. :D

5 juni 2026 om 01:58

Heeft gereageerd op het bericht van

Fancy_PantsFPV

@M4R5_FPV I was trying it out and whenever i start the flash it says Cant find RX.... Do you know why it cant find my Rx?

  Trying to initialize COM3 @ 420000


Attempting to detect FC UART configuration...

    ** Serial RX config detected: 'serial 5 64 115200 57600 0 115200'
Enabling serial passthrough...
  CMD: 'serialpassthrough 5 420000'

======== PASSTHROUGH DONE ========
======== RESET TO BOOTLOADER ========

  * Using full duplex (CRSF)

Cannot detect RX target, blindly flashing!

esptool.py v4.2.1
Serial port COM3
WARNING: Pre-connection option "no_reset" was selected. Connection may fail if the chip is not in bootloader or flasher stub mode.
Connecting...
.
.

4 juni 2026 om 08:22

Heeft gereageerd op het bericht van

Fancy_PantsFPV

@M4R5_FPV I havent tried it yet... I will definitly try it soon when i have time. Thanks a lot for the vid!

4 juni 2026 om 01:08

Heeft gereageerd op het bericht van

Fancy_PantsFPV

Its is a boot button. Thanks for the vid.😁

3 juni 2026 om 16:51

Heeft een bericht geplaatst

I was updating all my drones ELRs receivers to the latest version, and now both of the drones are stuck with the Led light solid even when my controller is off. 😭 I did see how you can buy a Radiomaster thing that fixes it, but they are all out of stock. Anyone know how to fix this? The drones are a custom 5 inch and a Meteor 75 pro with a built in Elrs.

28 mei 2026 om 23:48

Heeft gereageerd op het bericht van

Fancy_PantsFPV

@Kuzhii Nice I'll probably choose thoes. :D

27 mei 2026 om 04:59

Heeft gereageerd op het bericht van

Fancy_PantsFPV

Thanks for the info... Im probably gonna get Xing-e x pro 2207 or the Xing-e x pro 2306. They are pretty cheep+ they have a high kv so it probably will have more power.

27 mei 2026 om 01:01

Heeft een bericht geplaatst

I've been thinking about switching from 4s to 6s, and I was wondering if it has a very big impact when flying... Does it increase flight time, speed/power, or both? Also are 2207 motors better or worse than 2306 motors?

13 mei 2026 om 16:06

Heeft gereageerd op het bericht van

tz3den

I think 3 inch is a pretty good size. It has power to fly like a 5 inch it is noticeable weaker. It is also insanely fun to fly. Plus, when you fly a 3 inch it feels a lot safer because its >250g. One big downside at least for me is that they are pretty fragile. But at least for my 3 inch the repair cost is cheaper that my 75 mm FPV drone, like the BetaFPV Meteor 75 pro. ( I started on 3 inch also). For a 3 inch drone, I recommend the BabyApe pro v3.

6 mei 2026 om 15:02

Heeft gereageerd op het bericht van

Fancy_PantsFPV

Thx

6 mei 2026 om 01:22

Heeft een bericht geplaatst

Just was cruising around the park, recently I haven't been learning new tricks, and instead I just am trying to get better at the ones I know.

https://youtu.be/MJkeKg29BaY

30 april 2026 om 16:14

Heeft gereageerd op het bericht van

M4R5_FPV

Man that must've been a pretty crazy crash😂. I guess my VTX has never broken cuz I never crash it too hard.😅

30 april 2026 om 06:30

Heeft gereageerd op het bericht van

M4R5_FPV

Oof that stinks😭... What you can do to keep the mmcx on your VTX safe is to use an adapter that goes from Mmcx to SMA. Then you use a Sma antenna, and if you ever crash bad only the antenna will break and your vtx's connector will be fine. Have you tried this before? if not I definitly recommend it, its worked really well for me.

29 april 2026 om 22:40

Heeft gereageerd op het bericht van

M4R5_FPV

I've used Ufl connectors for my Vtx before and they usually break off.... So if its a 5inch or bigger(or even a 3 inch) probably go with MMCX. I guess it would be fine to use a UFL if it just connected to a UFL-SMA adapter.

24 april 2026 om 01:43

Heeft gereageerd op het bericht van

AlmondKing

I have never tried Ascent before, but I recommend watching a few videos on ascent and see if you think its worth the money. I have watched a few vids on Ascent and they say the latency is kinda bad. So if you want to just cruise around doing flips it will probably be good.

Fancy_PantsFPV

Explorer