Imagen de usuario

Fancy_PantsFPV

DIYFPV Explorer badge
Última visita: 20 oct, 6:33
Seguidores
15
Siguiendo
17
Votos positivos
1
Publicaciones
21
I've been flying fpv drones for almost 2 years. My youtube channel name is FancyPants FPV.

Feed de actividad

25 de septiembre de 2026 a las 21:38

Ha comentado la publicación de
MARK_AT_MELB_FPV
WOW! that is some smooth flying 🔥🔥🔥

18 de septiembre de 2026 a las 22:55

Ha comentado la publicación de
neochip
Probably DJI... I never owned anything buy DJI, but I never liked their camera drones because they aren't as fun as FPV drones Lol. l also like Walksnail and analog more then their O4 and O3 air units.(Mainly because I;m a budget baller when It comes to drones.)

24 de junio de 2026 a las 5:05

Ha comentado la publicación de
YorkieCanadian
My frame from aliexpress used injection molded plastic for the landing feet, gopro mount and antenna mount and all of the pieces broke. From my experience injection molded plastic is pretty weak so i don't think it will be a very durable quad.

15 de junio de 2026 a las 22:32

Ha comentado la publicación de
TheDuke
Here's a link for 3 DarwinFPV waterproof drones. https://darwinfpv.com/collections/waterproof 

5 de junio de 2026 a las 19:30

Ha comentado la publicación de
Fancy_PantsFPV
@M4R5_FPV Yeah, it just randomly decided to work after around the tenth time lol.

5 de junio de 2026 a las 2:14

Ha comentado la publicación de
Fancy_PantsFPV
@M4R5_FPV LETSS GOOOOOOOO. After trying a few more times it somehow worked loll. Thanks for the help. :D

5 de junio de 2026 a las 1:58

Ha comentado la publicación de
Fancy_PantsFPV
@M4R5_FPV I was trying it out and whenever i start the flash it says Cant find RX.... Do you know why it cant find my Rx? 
  Trying to initialize COM3 @ 420000


Attempting to detect FC UART configuration...

    ** Serial RX config detected: 'serial 5 64 115200 57600 0 115200'
Enabling serial passthrough...
  CMD: 'serialpassthrough 5 420000'

======== PASSTHROUGH DONE ========
======== RESET TO BOOTLOADER ========

  * Using full duplex (CRSF)

Cannot detect RX target, blindly flashing!

esptool.py v4.2.1
Serial port COM3
WARNING: Pre-connection option "no_reset" was selected. Connection may fail if the chip is not in bootloader or flasher stub mode.
Connecting...
.
.

4 de junio de 2026 a las 8:22

Ha comentado la publicación de
Fancy_PantsFPV
@M4R5_FPV I havent tried it yet... I will definitly try it soon when i have time. Thanks a lot for the vid!

4 de junio de 2026 a las 1:08

Ha comentado la publicación de
Fancy_PantsFPV
Its is a boot button. Thanks for the vid.😁

3 de junio de 2026 a las 16:51

Ha creado una publicación

I was updating all my drones ELRs receivers to the latest version, and now both of the drones are stuck with the Led light solid even when my controller is off. 😭 I did see how you can buy a Radiomaster thing that fixes it, but they are all out of stock. Anyone know how to fix this? The drones are a custom 5 inch and a Meteor 75 pro with a built in Elrs.

28 de mayo de 2026 a las 23:48

Ha comentado la publicación de
Fancy_PantsFPV
@Kuzhii Nice I'll probably choose thoes. :D 

27 de mayo de 2026 a las 4:59

Ha comentado la publicación de
Fancy_PantsFPV
Thanks for the info... Im probably gonna get Xing-e x pro 2207 or the Xing-e x pro 2306. They are pretty cheep+ they have a high kv so it probably will have more power.

27 de mayo de 2026 a las 1:01

Ha creado una publicación

I've been thinking about switching from 4s to 6s, and I was wondering if it has a very big impact when flying... Does it increase flight time, speed/power, or both? Also are 2207 motors better or worse than 2306 motors?

13 de mayo de 2026 a las 16:06

Ha comentado la publicación de
tz3den
I think 3 inch is a pretty good size. It has power to fly like a 5 inch it is noticeable weaker. It is also insanely fun to fly. Plus, when you fly a 3 inch it feels a lot safer because its >250g. One big downside at least for me is that they are pretty fragile. But at least for my 3 inch the repair cost is cheaper that my 75 mm FPV drone, like the BetaFPV Meteor 75 pro. ( I started on 3 inch also). For a 3 inch drone, I recommend the BabyApe pro v3.

6 de mayo de 2026 a las 15:02

Ha comentado la publicación de
Fancy_PantsFPV
Thx

6 de mayo de 2026 a las 1:22

Ha creado una publicación

Just was cruising around the park, recently I haven't been learning new tricks, and instead I just am trying to get better at the ones I know.


https://youtu.be/MJkeKg29BaY

30 de abril de 2026 a las 16:14

Ha comentado la publicación de
M4R5_FPV
Man that must've been a pretty crazy crash😂. I guess my VTX has never broken cuz I never crash it too hard.😅

30 de abril de 2026 a las 6:30

Ha comentado la publicación de
M4R5_FPV
Oof that stinks😭... What you can do to keep the mmcx on your VTX safe is to use an adapter that goes from Mmcx to SMA. Then you use a Sma antenna, and if you ever crash bad only the antenna will break and your vtx's connector will be fine. Have you tried this before? if not I definitly recommend it, its worked really well for me.

29 de abril de 2026 a las 22:40

Ha comentado la publicación de
M4R5_FPV
I've used Ufl connectors for my Vtx before and they usually break off.... So if its a 5inch or bigger(or even a 3 inch) probably go with MMCX. I guess it would be fine to use a UFL if it just connected to a UFL-SMA adapter. 

24 de abril de 2026 a las 1:43

Ha comentado la publicación de
AlmondKing
I have never tried Ascent before, but I recommend watching a few videos on ascent and see if you think its worth the money. I have watched a few vids on Ascent and they say the latency is kinda bad. So if you want to just cruise around doing flips it will probably be good. 

Volemos juntos y llevemos el mundo de los drones FPV a nuevas alturas.

Comunidad
Catálogo
Soporte y legal
© 2026 DIYFPV. Todos los derechos reservados.