Lyghtz
Feed attività
16 maggio 2025 alle ore 12:57
16 maggio 2025 alle ore 00:35
i am curently looking into buying an air65 freestyle, as i want to fly indoors aswell. But there are so many tiny whops any recomendation for an indoor freestyl tiny whop under 100 bucks?
16 maggio 2025 alle ore 00:33
is it just soldering on, or are there like these plug in thingys? and do i need to do anything software site of things? Thx alot
16 maggio 2025 alle ore 00:32
@Lyghtz It's a relatively easy upgrade. I've upgraded a few analogue Nazgul5's to DJI 03 no problem. I think the 04 is bulkier, so not sure about mounting with that.
14 maggio 2025 alle ore 20:37
Upgrading my analog nazgul eco to dji o4
hey,
i have had my nazgul eco for 6 months now i originaly purchased it as the anlog version as i wanted to save money. Now that i have flown some dji system drones from friends i really wanna upgrade to a dji 04 or djio3 if o4 dosnt work. But i have never built any kind of drone so i dont even know if its possible nor how hard it would be to upgrade my existing one. Any help is apriciated.
Best regards
Julius
6 aprile 2025 alle ore 23:35
Ive recently been looking into getting my own action cam/ gopro for my geprc vapor x5 i dont want to spend to much so less then 200 euros/dolars any recomendations?
20 gennaio 2025 alle ore 00:45
Yeah I requested an refund, and about the thightening never hurts to mention it. But I made sure that they were locked thought as far as they go acoroding to they’re specifications using an electric plier wich measures who much force something is thightend
19 gennaio 2025 alle ore 15:40
i already bought 2 new sets, and these new ones where quite expensive and purpose made and sold for fpv so maybe its bad nuts but at the same time it seems unlikely to me
19 gennaio 2025 alle ore 10:22
These are all I currently have
18 gennaio 2025 alle ore 17:17
sry but as you commented on his comment this website didnt allow me to credit you only the comment you commented on
18 gennaio 2025 alle ore 16:28
What nuts am I supposed to use?
For context this is about my vapor x5 again, I have asked before for help. My nuts keeping on my props keep on unscrewing themselves, I thightend them with pliers and all nothing worked. Now I was told I needed cw and ccw nuts, but the ccw nuts won’t screw on and all self thighting cw m5 nuts I used come lose and it’s always on the same 2 props, for context the drone uses inwards rotating props and my back right and front left nuts will not stay on! Please help me, I have no idea what else to do.
thx in advance
13 gennaio 2025 alle ore 20:12
Switch the motor direction for all motors in betaflight. It’ll fly just fine. You will have to swap the props as well though! Should keep the nuts on.
13 gennaio 2025 alle ore 20:11
I'd focus on hardware over software.
Your prop's don't fly off when your motor directions is wrong, so I think there's something else going on. I'd look at your motor, props (are they damaged/brittle/old) and nut (has the nut glue hardened beyond your usability, are they CCW , CW specific threads and been a mix up ?)combo and how you've been tightening them.
13 gennaio 2025 alle ore 20:11
I just checked i used cw nuts where ccw where supossed to be. I think thats the problem and i am goign to order new nuts both cw and ccw and make sure i use the accordingly to my motor spin direction so that they actually work thx alot
12 gennaio 2025 alle ore 22:29
Props unscrewing themself on launch on my vapor x5
I bought an vapor x5 recently, when i tried to launch it for the first time one of the props just flew right of. I thought i may have forgot to tieten it corectly so i did, all 4 props all using like strong pliers. But still the same problem! I checked if the props were in the right orientation, i checked if the motors rotated the way they are supossed to. But nothing worked another prop just flew of again instantly after trying to take of. Arming works fine, i let it sit whilst armed for about a minute and there were no props flying of.
Thx in advance for any help and tips :)
@Lyghtz I soldered on. You remove the SBUS wire from the Vtx plug and solder the rest of the plug wires onto board.
Mind it's Rx to Tx and Tx to Rx
You'll need to select HD OSD in BF firmware builder options, and change setting in Ports tab.