2sem. (modifié 2sem.)
First Premium Build: FlyfishRc Volador 3-Inch Frame Review
My latest Build 😀
This is my first “Premium” frame build. The FlyfishRc Volador 3 inch. I now realise the difference between Alliexpress cheap frames and an actual brand name.
I’m running 3S,Anyone else fly this frame?
Would it handle 4s and above ?
Also I wanted to add some video footage, is that an option on this site?
👍 5
2sem.
Nice build! Currently if you add youtube video it will embed here nicely.
We dont have dedicated video upload here, at least not yet 🙂
We dont have dedicated video upload here, at least not yet 🙂
😀 1
Répondre
2sem.
Auteur
Thanks I will try the YouTube option
Répondre
S
2sem.
for your question about the battery voltage (3S/4S) its not a question about the frame the frame dose not matter. its the props, motors, and battery voltage that have to match up.
its the motor Kv and batt voltage together matching the prop diameter to get the prop tip speeds to fall in ideal ranges. if you post the motor and prop specs i can take a look
Répondre
2sem.
Auteur
I realise that thanks mate, just meant is the frame sturdy on higher power motors and battery.
Répondre
2sem.
I only run my volador 3"/3.5" on 4s or 6s, havent done a 3s setup for any of them. It's very sturdy, no vibrations unless Im using +4blade props and hammering the throttle. 4s 3" with 1404 motors , 6s 3.5" with 1804. I have a bunch of vx/d 3, 3.5, 5 frames because they impressed me so much after the cheap knock off stage. There is a level above them that I have found since, but the voladors will always have a place in my fleet for cinematic flying.
Répondre
A
Laisser un commentaire