CarsonGreenlaw

It honestly looks like it has little damage so you could probably safely use it, but what I do when my batteries get damaged is use them for charging other batteries, powering goggles and other stuff. Just smell the battery and if it is a sweetish smell, throw it away, but if not, charge it on a low c rate and only charge to 4.1v.

Or you could remove those two cells and make it a 4s battery, I did it once and it worked well. Just be careful!

24 de enero de 2026 a las 22:21

Ha comentado la publicación de

Loop

I also use both.

24 de enero de 2026 a las 19:13

Ha comentado la publicación de

jonfpv

Get the DarwinFPV BabyApe Pro, I have flown DarwinFPV, and it is good. Also, it's about the same price as a tinywhoop, so you can't go wrong.

https://darwinfpv.com/products/darwinfpv-babyape-3?srsltid=AfmBOoq8C0U1ET-Y9MI-fnXgwdhU_I8OvGK_AULFqcVRPwWxK-pHHwqh&variant=45032273477807

23 de enero de 2026 a las 23:51

Ha comentado la publicación de

CarsonGreenlaw

Okay, the HD2's were defective so I returned them and just got the SkyZone 040 pro's. They arrive in a week or so, but until then, I'll use the Echo's.

22 de enero de 2026 a las 19:40

Ha creado una publicación

Here's a work of advice, don't disarm your drone at 380 feet... Don't ask me how I know the results... The drone is fine though 🤪 (it was a small 2").

22 de enero de 2026 a las 15:22

Ha comentado la publicación de

toon

That looks sick, but I will warn you that CNHL batteries aren't always reliable (i.e. cells dying randomly), so be careful, but they are really good batteries overall. Also, you might want to put a cover over those motor wires. The most frustrating thing is to go flying and have a motor wire cut in the middle of a flying session, but looks really good.

22 de enero de 2026 a las 15:16

Ha comentado la publicación de

slee

Use locktite, lots of it. Not too much though.

20 de enero de 2026 a las 13:49

Ha comentado la publicación de

TheDuke

Get the pocket and the AG01 nano's, That's my setup and I like it.

18 de enero de 2026 a las 22:34

Ha comentado la publicación de

CarsonGreenlaw

Wait, correction, I got the HD2's.

18 de enero de 2026 a las 22:34

Ha comentado la publicación de

CarsonGreenlaw

Thanks! I ended up getting the FatSharks instead on the 040 pro's because I got them for a really good deal. I might get the 040 pro's if the FatSharks aren't what I'm looking for. I remember that you have the FatShark echo's, do you have an issue with the smaller FOV on the SkyZones? I got the HD3's mainly for the reason that I love a large FOV for flying.

18 de enero de 2026 a las 21:36

Ha creado una publicación

Does anyone have any opinions or feedback on the FatShark Dominator HD3's?

17 de enero de 2026 a las 14:12

Ha comentado la publicación de

Ryanapp

First off, that is awesome! I mainly fly toothpicks, and that would be a boatload of fun! I don't know how easy it would be, but when you start selling them, it would be nice to include the 3 (triangle) mounting screw configuration because it is hard to find durable frames that have that specific mounting. What grade is the carbon fiber? I found a 2" toothpick frame (Only 2.5mm thick) with T700 and I have had zero issues with the frame breaking, whereas I have had other frames that break in the first dozen crashes. 3mm thickness, 3d printed guards, 80mm drone... That is sick, mini bando basher?

13 de enero de 2026 a las 1:16

Ha comentado la publicación de

Crofton77

NICE!

10 de enero de 2026 a las 18:30

Ha comentado la publicación de

oldguyFPV

That is a BEAUTIFUL flying spot, where is it generally located?

10 de enero de 2026 a las 16:39

Ha comentado la publicación de

oldguyFPV

Nice deer chasing!!!