13 W (bearbeitet 13 W)
Joining the Dark Side: Walksnail Avatar HD Pro Kit Ordered
I m joining the dark side 😂 Today I ordered a Walksnail Avatar HD Pro kit....
Any tips and tricks to get a great experience?
😅 1
👍 1
T
13 W
well i don't know. But have fun flying!! 😀
🤣 1
Antworten
13 W
I have one of these!
-Make sure your firmware matches in the goggles and the VTX.
-Set your aspect ratio to 4:3 instead of 16:9, this gives gyroflow more to work with when stabilizing
-Use a tiny square shim of shrink tube beneath the cover plate to hold the antennas onto the board more securely
-Replace the antennas with any other LHCP antenna, stock are not great, I use the Ospreys.
- Consider setting up a custom background on your goggles, you can use fine particles to help focus the diopters faster.
-Make sure your firmware matches in the goggles and the VTX.
-Set your aspect ratio to 4:3 instead of 16:9, this gives gyroflow more to work with when stabilizing
-Use a tiny square shim of shrink tube beneath the cover plate to hold the antennas onto the board more securely
-Replace the antennas with any other LHCP antenna, stock are not great, I use the Ospreys.
- Consider setting up a custom background on your goggles, you can use fine particles to help focus the diopters faster.
👍 1
Antworten
13 W
Autor
Thank you for your input!
❤️ 1
Antworten
12 W (bearbeitet 12 W)
I own the HD kit V2, but I think these things could be similar.
As mentioned, use other antennas, the cap of mine fell of while touching a wall with it (I was hovering 😂) inside my house. Also (I think that happens with every VTX but I made that mistake) if you plug in a battery for example to get a GPS fix and the VTX is powered, even if the goggles are disconnected it heats up and when you start flying, it somehow is in a low-power mode with a verrrrrry short range.
👍 1
Antworten
12 W
Autor
Thanks guys. Of course I will replace the including antennas (they are most of the time trash).
Antworten
A
Kommentar hinterlassen