Diskussionsbeitrag
Hey guys looking for some serious help. Recently I jsut bought the iflight nazgul evoque f5 v3 I update the elrs on my radio and drone but for some reason when I turn on my googles 3 and drone i get it connected I get a video feed it’s all good but once I turn on my radio the video drops and I get no transmission signal I thought this was an old issue that was solved but I guess not for me. The radio I’m using is radiometer gx12
9 W
I had a similar issue happen with a different quad - turned out to be that my UART config in Betaflight was incorrect. As soon as I fixed the BF config, the issue of video cutting out when armed disappeared.
Antworten
G
9 W
Autor
Can I add you so I can send a picture
👍 1
Antworten
9 W
@GreekDaddy Sure, no problem. You might also consider adding it to this thread so that other folks can weigh in on potential fixes :)
Antworten
G
9 W
Autor
The photo is too large I won’t let me add
Antworten
9 W (bearbeitet 9 W)
You could take a screenshot of the photo and send that instead or just reduce its filesize by bringing it into MS paint and resaving as a new file - the app will discard a lot of unnecessary data to create a smaller file. I keep my security pretty locked down so I'm not gonna give out my Discord info to a brand new user here. :)
Antworten
G
9 W
Autor
G
9 W
Autor
@BlaqkstarFPV how does it look
Antworten
G
9 W (bearbeitet 9 W)
Autor
Diese Antwort wurde gelöscht und ist nicht mehr verfügbar.
9 W
I'm not 100% sure what the Nazgul Evoque port config is supposed to look like, but from some quick googling, it looks like it should be something like the following:
UART1: Enable MSP and select VTX/Displayport if using digital
UART2: This is probably your ELRS receiver - enable serialRX on this
UART3: This is probably your GPS
If you want to be sure, check the physical wiring against the component wiring diagrams
UART1: Enable MSP and select VTX/Displayport if using digital
UART2: This is probably your ELRS receiver - enable serialRX on this
UART3: This is probably your GPS
If you want to be sure, check the physical wiring against the component wiring diagrams
Antworten
9 W
in windows SHIFT+Windows key +S is screen shot mode for windows. and easy to paste in other programs
👍 2
Antworten
A
Kommentar hinterlassen