82 W
Cobra X V2 DVR Footage at 30fps: Any Settings to Change?
Hi guys, I bought a second hand cobra x which is supposedly v2 and the menu says v2
But when I recorded DVR footage it came out as 30fps? Any ideas, the v1 are 30fps dvr and v2 are 60.
Am I missing a setting or are they just v1
😮 2
82 W (bearbeitet 82 W)
Diese Antwort wurde gelöscht und ist nicht mehr verfügbar.
82 W
Could be a FW mismatch. What happens when you select DVR FW Upgrade?
Antworten
82 W
Dug into the issue a little more. Some potential troubleshooting steps:
Check the firmware version: Go to the settings menu and confirm the firmware version. Compare it with the latest version available on Skyzone’s official website.
Update the firmware: Download the correct firmware for the Cobra V2 and follow the update instructions carefully. If the update fails, it might indicate a hardware mismatch.
Inspect the hardware: Look for any physical differences between the V1 and V2 models. For example, the V2 has a different button layout and a slightly updated design.
Contact the seller: If it turns out the goggles are V1 hardware misrepresented as V2, your should probably reach out to the seller for clarification or a refund.
🤘 2
Antworten
82 W
Autor
It says firmware update? press [ok], is your other response chatgpt? I don't think any external differences exist
Antworten
82 W
Yeah, second response is what I got when I plugged the issue into gen AI, so very likely to be mistaken RE: hw design.
I'd probably try and update the FW first and then work from there. Also just now noticing "HW: V1.2.3.4" - possibly indicating that they are v1 goggles(??)
I'd probably try and update the FW first and then work from there. Also just now noticing "HW: V1.2.3.4" - possibly indicating that they are v1 goggles(??)
Antworten
A
Kommentar hinterlassen