3-Inch Drone Won't Launch After Mud Landing - Need Help

Did you clean off all the mud? After that, see if your FC wants to connect to BF, if not, your FC is fried. If it does, go to the motors tab, make sure your props are removed, plug in a battery, and test all the motors individually and together. Hope this helps!

does it arm, does it only half hover, we need more details to tryly help. what specifically is happeneing when you try of take off. Did you replace the props? did you put them on backwards etc?

Thank you so much for the help, yes it arms  and when i push my throttle up it visibly tries to lift off the ground but wont. All motors spin. I  was flying and the props were the right way, then i landed in a bit of mud and it wouldnt take off. I havent replaced the props because they werent visibly damaged. But yes I will try to replace the props. Thank you uavfutures.  Okay will see if the fc connects to betaflight. Yes i cleaned off the mud but there wasnt really much, so thats why i was confused. Thank you will check each motor Drone Koorts.