Kcfpv

Ostatnio widziano: 2 wrz, 11:25

Obserwujący

Obserwowani

Głosy za

Wpisy

Just an FPV nerd from NorCal.

Kanał aktywności

1 maja 2025 02:13

Opublikowano post

I finally I had chance to test and compare different 3.5 inch props on my new build and haven't had enough experience with different pitches. I have to say, the Avan 3.5x2.8x3 props are BANANAS. Landing was super difficult and twitchy and the power was ridiculous. The HQ 3.5x2.0x3 were super mellow and would be great for nice flowy lines or something cinematic. Gemfam hurricane 3.5x2.5x3 are perfect for freestyle. Not too soft but not nearly as spicy as the Avans lol.

Anyone have any other 3.5" props they like? Something not yellow or grey would be a plus lol

6 kwietnia 2025 14:06

Skomentowano post użytkownika

UtahFPV

How did you mount and solder that capacitor? I just built one with a Walksnail VTX and there is just about no room for it.

4 kwietnia 2025 16:18

Skomentowano post użytkownika

hopper19

Same.

I tried to like analog again with a recent guild but I can't get over how much better digital (Walksnail) is for me.

31 marca 2025 17:00

Opublikowano post

Anyone else keeping an eye on OpenIPC?

This seems like a cool development. I'd love to try it but I think the software is a little above my skill at the moment.

https://shop.runcam.com/runcam-wifilink-rx/

28 marca 2025 16:09

Skomentowano post użytkownika

proantifpv

5 inch is cool and all but it depends on where you fly. Around my house 3.5 is better because the 5 inch was ridiculously fast. It was like trying to drive a Ferrari on a go cart track.

Now if I was flying big office parks and what not 5 inch would be way better.

25 marca 2025 04:29

Skomentowano post użytkownika

Uri-Nator87

I love the way mine flys with the 1804s and 4s.

24 marca 2025 01:22

Skomentowano post użytkownika

Kcfpv

So I just realized I bought a "UART CONTROL version" of the camera where I guess the camera is set to default as joystick control. Would this be the source of my issue? How do I disable joystick control if the camera did not include it?

23 marca 2025 03:41

Skomentowano post użytkownika

Kcfpv

Lol yes.

23 marca 2025 03:40

Skomentowano post użytkownika

Kcfpv

Mine is the same but I have the data wire from the VTX on T1. I pretty much copy and pasted the VTX table from Oscar Liang. I don't mind setting everything up in Betaflight and just leaving it. Maybe I'll remove the Data wire from the FC and see what happens.

22 marca 2025 03:50

Skomentowano post użytkownika

Kcfpv

It is set to auto and even the elements in the center are not showing up. I also cannot access the smart audio menu in the goggles is another thing I found.

22 marca 2025 03:48

Skomentowano post użytkownika

Kcfpv

No OSD pad. Here is the diagram if it helps

21 marca 2025 04:07

Opublikowano post

I got my new analog build together and got it out today for a maiden flight.The problem I have is that the OSD is missing and I'm not sure if I have a wiring issue or Betaflight issue.

Camera is Runcam Phoenix 2 JB edition, Speedybee f405 mini, and Rush Tank Solo 1w VTX. Camera is wired to power, ground, and cam pads on FC. VTX is wired to 9v and ground, data on VTX to TX on FC and Video to VTX pad on FC.

Goggles on and plug in the battery I get video fine but no Betaflight logo or OSD. I do have a notice in the the upper left that says UART CONTROL.

19 marca 2025 14:23

Skomentowano post użytkownika

Kcfpv

Not sure yet. Still waiting for a nice day to fly it. It has been either raining or too windy to fly.

19 marca 2025 14:08

Skomentowano post użytkownika

Kcfpv

TBD. Just got it together but the weather has been uncooperative.

19 marca 2025 04:42

Opublikowano post

Built this LilMatey 3.5 today. I wanted an analog build just for fun and I have only done Walksnail builds so far.

Rush Tank Solo, Speedybee f405 mini, ELRS, Runcam Phoenix 2 JB edition, and FlyfishRC 1804 3500kv motors.

Now if the weather would cooperate I could fly it lol

28 lutego 2025 01:06

Skomentowano post użytkownika

ThrottleJunkie

XNova 1804 3500kv 4s motors are great in that frame. Feels closer to a 5inch to me. I run them on mine using 1100mah 4s batteries and get a good 5 minutes of hard flying.

21 lutego 2025 22:47

Skomentowano post użytkownika

Nyooni

Might want to check and see if there is a battery in them. I've never charged mine since I ran them off external power.

IDK the exchange rate but I got mine a couple years ago for $200 USD used a couple years ago.

21 lutego 2025 05:07

Opublikowano post

I am changing one of my quads from a XT30 to XT60 so I don't have to have 2 different types of 4s batteries for my 2 other quads. However I have 1 4s Li Ion pack with a XT30 connector. Would there be any issue running that better with a XT30/XT60 adapter? My AIO is 40amp and 2004 motors if it matters.