Aussiegwapo

I also had to change direction in betaflight for some reason it when back to normal motors spin in

The bluejay has also help i think I'm un sure but found a video on YouTube betaflight motors won't spin try this!!! By FluentFPV

Now I'm getting it jumps in the air falls back to the ground due to all motors stopped crazy but getting some where with this drone

I found a solution to this issue in betaflight the solution is by turning on bidirectional Dshot then saving it now motor 1 runs in betaflight as well under reorder motors.

Thats a great question when switching to bluejay comes up select pwm frequency 24 48 96 are what's listed.

I did a motor swop. Now wants to go in to flip out but still motor one not running when throttle up but in betaflight it's the same on its own won't spin but with mater controller spins up fine. Drone been put away for years till I could work out what happening and why only motor 1 cuts out and others now rev out of control thats after the swop.

To troubleshoot this issue, firstly swap 2 motors and see if it is still happening.

So if it is a motor issue the same motor should do the same thing in the new position. If it si the ESC the motor in the same position on the quad should show the same issue.

I did this on my qaud yesterday and worked out it is the motor.

I tested it in betaflight by powering up the motor and see if it worked correctly or not.