T
20 t.
Wpis na forum
i want to make a fpv drone but it is very expensive (because i live in Malaysia). I'm thinking to make a brushed one but the problem is that they don't sell brushed 75mm frames but only sell the newbeedrone cockroach brushed 65mm. Anybody that can help me or already 3d modeled a 75mm brushed frame? oh yeah the dimension of the motor is 6x15mm. the battery dimensions is 50x17x6.5mm. Thanks if you guys would put your time to model this frame. Btw, any pilot that uses brushed fpv drone?
20 t.
You can use Cetus lite’s frame if you can find the model of it.
Odpowiedz
T
20 t.
Autor
yup, thanks a lot!
Odpowiedz
20 t.
Interesting project! I've flown some old brushed whoops. What I can say is that they wear out a lot faster than brushless motors, expect to replace them every 5 hours of usage. Also make shure you get the right size props since the 615 brushed motors often use 0.8mm shafts which will only fit with 0.8mm props (1mm will be too loose).
Odpowiedz
T
19 t.
Autor
yup! knew that alr but thanks!
Odpowiedz
A
Dodaj komentarz